Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. A representative will get in touch with you shortly.

Designed to be used with 3D CAD systems, EnvisionTEC’s 3D printers translate CAD data into voxels which are projected through a DLP® projection system and focused through a series of precision optics into a photopolymer-based liquid. This hardens into a 3D model voxel by voxel. Curing of the resin is amazingly fast; the complete build area can be cured simultaneously, regardless of the quantity, complexity, or size of the pieces.

EnvisionTEC utilizes the extremely reliable Digital Micromirror Device (DMD) technology from Texas Instruments. Calibration of the machine could not be easier for the operator as it is a semi-automatic process and takes just a few minutes. The machine is so simple to use that it requires no expert technician to operate and maintain. End user costs are therefore minimized.

Available models
Perfactory®4 Mini XL / Standard / Standard XL
Machine Specification:
P4 Mini XL
P4 Standard
P4 Standard XL
Build Envelope (factory adjustable)*:
115 x 72 x 220 mm
160 x 100 x 180 mm
192 x 120 x 180 mm
Native Voxel Resolution in X & Y**
60 μm
84 μm
100 μm
ERM Voxel Resolution in X & Y**:
30 μm
42 μm
50 μm
Dynamic Voxel resolution in Z:
15 - 150 μm***
15 - 150 μm***
15 - 150 μm***
Projector Resolution:
1920 x 1200 native pixels
1920 x 1200 native pixels
1920 x 1200 native pixels
Footprint:
73 x 48 x 135 cm
73 x 48 x 135 cm
73 x 48 x 135 cm
Weight Approx:
85 kg
85 kg
85 kg
Electrical Requirement:
100 - 120V, 5.5A / 220 - 240V, 2.4A
100 - 120V, 5.5A / 220 - 240V, 2.4A
100 - 120V, 5.5A / 220 - 240V, 2.4A

System specifications are subject to change without notice.

* Deviation of +/- 2mm is possible.

** A voxel is a volumetric pixel.

*** Accuracy is pre-adjusted by each material module and therefore material-dependent.

Features

  • Material changeover achieved in minutes utilizing an easily interchangeable basement
  • Constant build speed regardless of quantity or complexity of parts (only the dynamic Z voxel will affect this)
  • Choice of over 15 different resins
  • Finest detail in the shortest time
  • Resolution and surface finish remains constant over the entire build area
  • Equipped with the Enhanced Resolution Module (ERM) enabling resolutions down to 10 microns in the X and Y
Perfactory®3 Mini Multi Lens
Machine Specification:
Lens f=60
Lens f=75
Lens f=85
Build Envelope*:
84 x 63 x 230
59 x 44 x 230
44 x 33 x 230
Native Voxel Resolution in X & Y**:
60 μm
42 μm
32 μm
ERM Voxel Resolution in X & Y**:
30 μm
21 μm
16 μm
Dynamic Voxel resolution in Z:
15 - 150 μm***
15 - 150 μm***
15 - 150 μm***
Projector Resolution:
1400 x 1050 native pixels
1400 x 1050 native pixels
1400 x 1050 native pixels
Footprint:
73 x 48 x 135 cm
73 x 48 x 135 cm
73 x 48 x 135 cm
Weight Approx:
70 kg
70 kg
70 kg
Electrical Requirement:
100 - 120V, 5.4A / 220 - 240V, 2.4A
100 - 120V, 5.4A / 220 - 240V, 2.4A
100 - 120V, 5.4A / 220 - 240V, 2.4A

System specifications are subject to change without notice.

* Deviation of +/- 2mm is possible.

** A voxel is a volumetric pixel.

*** Accuracy is pre-adjusted by each material module and therefore material-dependent.

Features

  • Easy maintenance, low cost and user friendly Rapid Prototype Manufacturing System
  • The Mini MML has the highest precision which is perfect for precision components
  • Produces the finest detail with constant and high build speed regardless of quantity or complexity of parts (only the dynamic Z voxel will affect this)
  • Choice of over 15 different resins can be used
  • Equipped with the Enhanced Resolution Module (ERM) enabling resolutions down to 16 microns in the X and Y
Perfactory® Aureus Plus and Apollo Plus
Machine Specification:
Aureus Plus Apollo Plus
Aureus Plus Apollo Plus
Build Envelope*
60 x 45 x 100 mm
100 x 75 x 100 mm
Voxel Resolution in X & Y**:
43 μm
71 μm
Dynamic Voxel Resolution in Z:
25-35 μm***
25-150 μm***
Projector Resolution:
1400 x 1050 native pixels
1400 x 1050 native pixels
Footprint:
45 x 55 x 78 cm
55 x 45 x 89 cm
Weight Approx:
35 kg
35 kg
Electrical Requirement:
100 - 120V, 2A / 220 - 240, 1A
100 - 120V, 2A / 220 - 240, 1A

System specifications are subject to change without notice.

* Deviation of +/- 2mm is possible.

** A voxel is a volumetric pixel.

*** Accuracy is pre-adjusted by each material module and therefore material-dependent.

Features

  • Perfect choice for the jewellery industry for small to medium companies to enable full production requirements
  • Aureus Plus Builds 8-12 pieces in hours
  • Apollo Plus features enlarged build envelope for customized jewelry with an unbeatable price to performance ratio
  • Choice of materials for direct casting, hot rubber and silicone molding
  • Resolution and surface finish remains constant over the entire build area
Micro Plus Hi-Res and Micro Plus Advantage
Machine Specification:
Micro Plus Hi-Res
Micro Plus Advantage
Build Envelope*:
45 x 28 x 100 mm
65 x 40 x 100 mm
ERM Voxel Resolution in X & Y**:
30 μm
60 μm
Projector Resolution:
1024 x 768 native pixel
1024 x 768 native pixel
Dynamic Voxel Resolution in Z***:
25μm - 75 μm
25μm - 75 μm
Footprint:
23 x 24 x 64 cm
23 x 24 x 64 cm
Weight Approx:
16 kg
16 kg
Electrical Requirement:
110 VAC @ 3A
110 VAC @ 3A

System specifications are subject to change without notice.

* Deviation of +/- 2mm is possible.

** A voxel is a volumetric pixel.

*** Accuracy is pre-adjusted by each material module and therefore material-dependent.

Features

  • Smallest personal desktop 3D printer
  • Can produce small components requiring a high level of precision
  • Perfect for small to medium-sized businesses in the jewellery industry to enable full production capability
  • Ideal for producing high quality, small jewelry components
  • Long Life LED DLP light source with zero maintenance and very low acquisition cost
  • Micro Plus Hi-Res builds 5-6 average ring sizes in a single build
  • Micro Plus Advantage builds 10-12 average ring sizes in a single build
  • Machinery & Manufacturing

Contact Us

Beijing
26th Floor, West Tower, Hanwei Plaza
No.7 Guanghua Road, Chaoyang District, Beijing
TEL: 010-6561 3988
FAX: 010-6561 0278
http://dksh-machinery.com
Shanghai
Room Unit 605-607, Build 2, Xinglian Building,
No.1535 Hongmei Road, Xuhui District, Shanghai
TEL: 021-5383 8811
FAX: 021-3367 8466
http://dksh-machinery.com
Chengdu
Room 802, 8/F, Tower 1, Central Plaza
No.8 Shuncheng Street, Chengdu
TEL: 028-8676 1111
FAX: 028-8676 1122
http://dksh-machinery.com
Guangzhou
Room 1213-1215, 12/F Jie Tai Plaza,
218-222 Zhongshan Road ,Guangzhou
TEL: 020-8132 0662
FAX: 020-8132 0663
http://dksh-machinery.com
Xi'an
B-4-H, K.I.Tower,
No.1 Xihuamen, Xi'an
TEL: 029-8833 7412
FAX: 029-8833 7415
http://dksh-machinery.com
Hongkong
23/F, Tower A, Southmark,
11 Yip Hing Street, Wong Chuk Hang, Hong Kong
TEL: 00852-2880 9808
FAX: 00852-2369 1042
http://dksh-machinery.com
EnvisionTEC

Ever since EnvisionTEC patented the Perfactory Digital Light Processing (DLP) machine in 1999, we have built a reputation for reliable and high-quality engineering solutions. Our engineering expertise has been leveraged to manufacture award-winning, high-speed, and economical 3D printers that lead the market in multiple industry verticals.

Conventional DLP based projectors were considered when EnvisionTEC decided to build a 3D printer. These were rejected as either 1) incapable of achieving the resolution required or 2) cost-prohibitive in terms of ongoing maintenance for the professional end user or 3) having a short lifecycle rendering them obsolete in less than 3 years. Thus, the Perfactory DLP process was born and subsequently commercialized in 2002.

[EnvisionTEC, 3D Priner]