Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. A representative will get in touch with you shortly.
HAIMER - Measuring Instruments - 3D-Sensors and centering devices

The HAIMER 3D-Sensors are very precise and wide-ranging measurement devices for milling and EDM machines (isolated probe tip). They are clamped into a tool holder and inserted into a milling spindle and make it possible to position the spindle axis exactly on the edges of the workpiece. This allows for zeros to be set and the length to be measured quickly and easily. You may approach in any direction (X-, Y-, Z-Axis). When the dial gage shows zero, the spindle axis is exactly on the workpiece edge.

Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt. No calculating of the probe’s ball diameter is necessary – just Zero it out! Problems with mathematics or calculations are eliminated, allowing for fewer operator errors.

By using the HAIMER Centro centering bores and arbors is quick and precise.

Available models
DKSH-HAIMER-3D-Sensor-New-Generation
Specifications
3D-Sensor New Generation
L1 [mm]
101
L2 [mm]
25
Ø D1 [mm]
12
Ø D2 [mm]
4
B [mm]
62
Smallest unit of measure [mm]
0,01

The 3D-Sensor New Generation is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.

Key Features

  • Exact positioning of the spindle axis on the edges of the workpiece
  • Smallest unit of measure of 0,01 mm / 0.0004"
  • Replaceable probes for maximum flexibility
  • IP 67 waterproof
DKSH-Haimer-Centro-measuring-instrument
Specifications
Centro
L1[inch]
3.6
L2 [inch]
1.89
Ø D1 [inch]
0.63
Ø D2 [inch]
0.2
B [inch]
3.15
Smallest unit of measure [inch]
0.0004
Centering accuracy [inch]
0.0001
Max. rotation speed [rpm]
150
Measuring range interior diameter (drill hole) [inch]
0.1 - 5
Measuring range exterior diameter (shaft, with probe tip bent) [inch]
0 - 5

Coaxial indicator Centro

The HAIMER Centro is a very precise and versatile measuring instrument to center bores and arbors.

Center bores and arbores quick and precise
The Centro is clamped in a tool holder and positioned close the sought axis. The probe tip is adjusted and touches the bore or arbor all the way around.

Dial gauge always in field of vision
With low rpm the probe slides along the bore or arbor. Its movement is transferred to the dial gauge. By using an antenna the Centro does not spin around and stays in field of vision. 

By using the Centro you find the axis of bores or arbors - reliably
As long as the spindle is out of the center of the bore or arbor the hands of the dial gauge stay in movement. By changing the position of x- and y- axis at the machine you can jibe the axis of the spindle and the work piece. 

Key Features

  • uick and exact centering of borings and shafts
  • Centering accuracy of 0,003 mm / 0.0001"
  • Replaceable probes for maximum flexibility
DKSH-HAIMER-Universal-3D-Sensor
Specifications
Universal 3D-Sensor
L1 [inch]
4.4
L2 [inch]
1.97
Ø D1 [inch]
0,75
Ø D2 [inch]
0.2
B [inch]
2.6
Smallest unit of measure [inch]
0.0004

The Universal 3D-Sensor is a very precise and versatile measuring instrument for milling and EDM machines (insulated probe).

Key Features

  • Exact positioning of the spindle axis on the edges of the workpiece
  • Smallest unit of measure of 0,01 mm / 0.0004"
  • Replaceable probes for maximum flexibility
  • IP 67 waterproof
DKSH-HAIMER-3D-Sensor-Digital-measuring-instrument
Specifications
3D-Sensor Digital
L1 [inch]
4.4
L2 [inch]
1.97
Ø D1 [inch]
0,75
Ø D2 [inch]
0.2
B [inch]
2.6
Smallest unit of measure [inch]
0.00005
Repeatability [inch]
0.00005
Measuring accuracy [inch]
0.0002
Display mode
inch / metric
Display size [inch]
1.8 x 0.9
Height of numbers [inch]
0.3
Service life of battery approx. (continuos operation) [hrs]
3000

The Digital 3D-Sensor is a further development of the time proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines.
 

Key Features

  • Exact positioning of the spindle axis on the edges of the workpiece
  • Smallest unit of measure of 0,001 mm / 0.00005"
  • Replaceable probes for maximum flexibility
  • IP 64 dust- and waterproof
DKSH-HAIMER-3D-Sensor-Zero-Master-measuring-instrument
Specifications
3D-Sensor Zero Master
L1 [inch]
3.7795
L2 [inch]
0.9764
Ø D1 [inch]
0.39
Ø D2 [inch]
0.2
B [inch]
1.92
Smallest unit of measure [inch]
0.0004

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines.


Key Features

  • Exact positioning of the spindle axis on the edges of the workpiece
  • Smallest unit of measure of 0,01 mm / 0.0004"
  • Replaceable probes for maximum flexibility
  • IP 67 waterproof
  • Aerospace
  • Automotive
  • Die & Mould
  • Education & Academics
  • Electronics
  • Machinery & Manufacturing
  • Medical
  • Mining & Minerals
  • Oil & Gas
  • Semiconductor, Solar & Electronics
  • Shipbuilding

HAIMER 3D-Sensors

HAIMER sensors are solid, reliable, practical and easy to use and produce reliable results. For many years now, they have been used all around the world in numerous different machines, from a manual milling machine to machining centres, they accurately position the spindle axis by the easiest method possible.

  • Cambodia
  • China
  • Indonesia
  • Korea
  • Laos
  • Malaysia
  • Myanmar
  • Philippines
  • Singapore
  • Taiwan
  • Thailand
  • Vietnam
HAIMER

HAIMER is a family run, medium sized company located in Igenhausen, Bavaria near Augsburg, Germany. We design, produce and sell innovative, high precision products for metal cutting as well as for other branches including automotive, aerospace, energy, rail and general machining. In addition to our large offering of tool holders in all popular interfaces and lengths, including our shrinking and balancing machines, as well as our 3-D Sensors, solid carbide cutting tools, our product offering now also includes tool presetting machines.

As the European market leader in the area of tool holding technology, with a daily capacity of approx. 2,000 tool holders, keeping the technological edge of our products is very important to us. Because of this, every year we invest between 8 and 10% of our revenue in research and development. Every day we desire to be better and that works perfectly with our corporate philosophy: Quality Wins

[HAIMER, Measuring Instruments, 3D-Sensors and centering devices]