Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. A representative will get in touch with you shortly.
HAIMER - Tool Holders

The right clamping technology for every kind of machining operation.

During machining, specific demands for tool holding are laid down by each industry and application. The range varies from high-speed cutting to heavy roughing.

HAIMER offers the right solution and clamping technology for all specific requirements. Therefore, each year we invest approximately 10 percent of our turnover in research and development.

Our primary interest is to offer our customers sustainable solutions which enable a competitive advantage. This way, you can always maintain your competitive advantage in machining.

Available models
DKSH-HAIMER-Steep-taper-ASME-B5.50-CAT40-CAT50
CAT40
CAT50
Clamping diameter range [inch]
1/8 - 1 1/4
1/4 - 1 1/4
Clamping Ø D1 [inch]
1/8
1/4
Ø D2 [inch]
0.39
0.83
Ø D3 [inch]
-
1.06
L [inch]
0.35
1.42

The traditional interface for milling spindles ASME B5.50 distinguishes itself through its extremely robust design. Its field of application ranges from fine machining to heavy duty roughing. The tool holder is pulled in the milling spindle with the help of an additional pull stud. The centering takes place via the taper contact. Therefore, the ASME B5.50 steep taper interface is primarily suitable for applications with a spindle speed of up to 12,000 rpm.

Key Features

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form ADB
DKSH-HAIMER-Steep-taper-JIS-BT30-BT40-BT50
BT30
BT40
BT50
Clamping diameter range [inch]
1/8 - 3/4
1/8 - 1 1/4
6 - 32
Clamping Ø D1 [inch]
1/8
1/8
6
Ø D2 [inch]
0.39
0.39
21
Ø D2 [inch] ultra short
0.39
-
-
Ø D3 [inch]
-
-
27
Ø D3 [inch] ultra short
-
-
-
L [inch]
0.35
0.35
36
L [inch] ultra short
0.35
-
-

The spindle interface JIS B 6339 as the traditional interface for milling spindles distinguishes itself through it robust design. Its field of application ranges from fine machining to heavy duty roughing. The tool holder is pulled in the milling spindle with the help of an additional pull stud. The centering takes place via the taper contact. Therefore, the JIS B 6339 interface is primarily suitable for applications with a spindle speed of up to 12,000 rpm.

Key Features

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • Taper tolerance AT3
DKSH-HAIMER-hollow-taper-shank-DIN-69893-HSK-A-HSK-E-HSK-F

The interface DIN 69893 has become the new standard for machining centres. The holder is clamped via its taper with flange contact surface. By doing so, a highly accurate centring and fixed axial position of the holder in the spindle is granted with a high repetitive accuracy when exchanging the tools. In the DIN 69893-1 HSK-A interface design an additional torque transmission takes place at the taper shank with drive keys. DIN 69893 HSK-A/HSK-E/HSK-F is mainly used in high-speed machining.

Key Features

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm ( HSK-F80 at 33.000 rpm)
  • All functional surfaces fine machined
  • More accurate than DIN
DKSH-HAIMER-ISO-26623-CAPTO™-C6
C6
Clamping diameter range [inch]
1/4 - 1 1/4
Clamping Ø D1 [inch]
1/4
Ø D2 [inch]
0.83
Ø D3 [inch]
1.06
L [inch]
1.42

The ISO 26623 spindle interface is an innovative tooling system with maximum precision and particularly widespread in multi-task machines (turn-mill centres). The torque transmission and centring takes place via the polygon-shaped taper with flange surface contact. As a result, a fixed axial positioning and a high degree of torsional rigidity is achieved.

Key Features

  • Chuck body fine balanced G2.5 at 25.000 rpm
  • All functional surfaces fine machined
  • More accurate than DIN
  • Aerospace
  • Automotive
  • Die & Mould
  • Education & Academics
  • Electronics
  • Machinery & Manufacturing
  • Medical
  • Mining & Minerals
  • Oil & Gas
  • Semiconductor, Solar & Electronics
  • Shipbuilding

Safe-Lock™ - The pull-out protection for your shank cutting tools

Keys in the chuck grip the grooves in the tool shrank. In addition to the frictional clamping force of the shrink fit chuck, the tool is held using positive locking. As a result, micro-creeping is effectively prevented.

  • Cambodia
  • China
  • Indonesia
  • Korea
  • Laos
  • Malaysia
  • Myanmar
  • Philippines
  • Taiwan
  • Thailand
  • Vietnam
HAIMER

HAIMER is a family run, medium sized company located in Igenhausen, Bavaria near Augsburg, Germany. We design, produce and sell innovative, high precision products for metal cutting as well as for other branches including automotive, aerospace, energy, rail and general machining. In addition to our large offering of tool holders in all popular interfaces and lengths, including our shrinking and balancing machines, as well as our 3-D Sensors, solid carbide cutting tools, our product offering now also includes tool presetting machines.

As the European market leader in the area of tool holding technology, with a daily capacity of approx. 2,000 tool holders, keeping the technological edge of our products is very important to us. Because of this, every year we invest between 8 and 10% of our revenue in research and development. Every day we desire to be better and that works perfectly with our corporate philosophy: Quality Wins

[tool holders, DIN 69893, ASME B5.50, CAT 40, CAT 50, JIS B 6339, BT 30, BT 40, BT 50, HSK-A 32, HSK-A50, HSK-A40, HSK-A 63, HSK-A 100, HSK-A 80, HSK-A 125, HSK-E 25, HSK-E 32, HSK-E, HSK-A, CAPT0™ C6 ISO 26623, HSK-F]