Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. A representative will get in touch with you shortly.

TWIN Line high speed milling machines

Product Introduction

TWIN CONCEPT is a line of high speed milling machines characterized by fixed and mobile bench, which varies from the double working area (patented) for independent machinings with 3-4-5 axes to the machinings of pieces with 3-4 independent axes or with 5 axes at the same time time (patented) to complete the machinings of "twin" pieces with machinings to 3-4-5 axes. Having been projected through the calculation to ended elements, FEM, TWIN CONCEPT introduces all the good characteristics that countersign the OMV products.

Product description

TWIN CONCEPT is a line of high speed milling machines characterized by fixed and mobile bench, which varies from the double working area (patented) for independent machinings with 3-4-5 axes to the machinings of pieces with 3-4 independent axes or with 5 axes at the same time time (patented) to complete the machinings of "twin" pieces with machinings to 3-4-5 axes. Having been projected through the calculation to ended elements, FEM, TWIN CONCEPT introduces all the good characteristics that countersign the OMV products.

Technical specifications

HSC-2 SPINDLES TWIN-800 TWIN-SPLIT
Longitudinal Travel 1100 800 - 800 mm 1050 - 1050 mm
Cross Travel 650 mm 650 mm 650 mm
Vertical Travel 500 mm 510 mm 700 mm
Feeds 0 - 28000 mm/1` 0 - 60000 mm/1` 0 - 60000 mm/1`
Brushless AC spindle motor 29 • 30 • 41 kw 29 • 41 kw 29 • 41 kw
Available models
TWIN-800
Longitudinal Travel
800 - 800 mm
Cross Travel
650 mm
Vertical Travel
510 mm
Feeds
0 - 60000 mm/1`
Brushless AC spindle motor
29 • 41 kw

The model TWIN-800 is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration with double working area (patented). Projected through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.
 

TWIN-SPLIT
Longitudinal Travel
1050 - 1050 mm
Cross Travel
650 mm
Vertical Travel
700 mm
Feeds
0 - 60000 mm/1`
Brushless AC spindle motor
29 • 41 kw

The model TWIN-SPLIT is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration with double working area (patented). Projected through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.

HSC-2 SPINDLES
Longitudinal Travel
1100
Cross Travel
650 mm
Vertical Travel
500 mm
Feeds
0 - 28000 mm/1`
Brushless AC spindle motor
29 • 30 • 41 kw

The model HSC-2 SPINDLES is a high speed milling machine characterized for its very compact line and cleaning up, and for the fixed bed and mobile column configuration with double spindle. Projected through the calculation to finished elements, FEM, introduces good characteristics of rigidity in the movements and damping of the vibrations. If to this the low attritions and the elevated accelerations of the axes are added, are obtained so all the characteristics that allow to get particularly bright dynamic performances in finish, but at the same time make it a very performing in roughing. The all to advantage of the economy of the whole cycle of machining.

Key features

Fixed Portal Milling Machine with a Moving Table. An advanced machine giving an innovative solution with a state-of-the-art performance.
All main structures are designed with the most powerful software systems for calculation and analysis.
To obtain the high dynamic control, the machine is built in steel alloy, this solution for its given mass, guarantees greater stiffness compared to conventional materials such as cast iron. This has contributed to the realization of a machine of high precision and rigidity together with outstanding dynamic performance.
All structures undergo a stress relieving heat treatment to eliminate tensions that are created during the transformation process. The linear guides with roller bearings and with a low center of gravity, are widely dimensioned and attached directly to the structures.

  • Aerospace
  • Automotive
  • Die & Mould
  • Electronics
  • Machinery & Manufacturing
  • Medical
  • Mining & Minerals
  • Oil & Gas
  • Semiconductor, Solar & Electronics
  • Shipbuilding

Contact Us

Beijing
26th Floor, West Tower, Hanwei Plaza
No.7 Guanghua Road, Chaoyang District, Beijing
TEL: 010-6561 3988
FAX: 010-6561 0278
http://dksh-machinery.com
Shanghai
Room Unit 605-607, Build 2, Xinglian Building,
No.1535 Hongmei Road, Xuhui District, Shanghai
TEL: 021-5383 8811
FAX: 021-3367 8466
http://dksh-machinery.com
Chengdu
Room 802, 8/F, Tower 1, Central Plaza
No.8 Shuncheng Street, Chengdu
TEL: 028-8676 1111
FAX: 028-8676 1122
http://dksh-machinery.com
Guangzhou
Room 1213-1215, 12/F Jie Tai Plaza,
218-222 Zhongshan Road ,Guangzhou
TEL: 020-8132 0662
FAX: 020-8132 0663
http://dksh-machinery.com
Xi'an
B-4-H, K.I.Tower,
No.1 Xihuamen, Xi'an
TEL: 029-8833 7412
FAX: 029-8833 7415
http://dksh-machinery.com
Hongkong
23/F, Tower A, Southmark,
11 Yip Hing Street, Wong Chuk Hang, Hong Kong
TEL: 00852-2880 9808
FAX: 00852-2369 1042
http://dksh-machinery.com
Parpas S.p.A.Born in 1951 as PARPAS Spa, the GRUPPO PARPAS started as a manufacturer of pantograph machine tools, then of copying machines, and now of numeric control milling units. Over the years, accumulating experience in the sector, its ambitions grew and began to devote itself to the production of CNC milling machines. Currently PARPAS, world market leader in milling and copying of large molds, produces a line of medium-large milling machines with the best technology. Given the initial success, in 1969, ownership decided to set up OMV (Officine Meccaniche Venete) which, since 1972, offered in the market a line of small-medium size machine tools. Originally the proposed range is that of knee-type milling machines, subsequently, in 1974, it mainly directs itself to the production of machine tools featuring stationary bench and movable upright, the first with this particular feature to be built by an Italian company. Today OMV is committed to the realization of high-speed machines that boast, in addition to the working speed, the same precision and flexibility that has always characterized its production. The salient characteristic of PARPAS Group is to build "custom" machine tools, for which design and produce machines on precise specifications of the customer, features well known and recognized worldwide by customers including famous names.
[OMV, PARPAS, TWIN, high speed, milling machines ]