Please leave a message
For heat sensitive, high boiling products, and high molecular weight materials! This apparatus can make uniform thin-film. You can choose the standardized (Blue Label) or custom-made (Gold Label) product depending upon your needs.
|Minimum Thermal Decomposition||Perfect for Highly viscous products & Heat sensitive products
|High Evaporation Efficiency||Easy to be evaporated|
|Uniform Rotating Wiper System||The thin film is formed by the centrifugal force for shorter residence time.|
|Uniformed Thin Film||Higher Evaporation Efficiency
The uniform liquid film is created on the heating surface via the use of glass tube.
|Grease-less Monitor the Process Visually||The main body of the evaporator is made of Borosilicate glass 3.3.|
|Greaseless Valve and Joints||No Contamination
|Grease-less Magnetic Sealed Bearing||Gas & Vacuum tight
Consistent torque throughout entire temperature range
Easy cleaning and maintenance
|Maximum Jacket Temperature||Temperature Range Up to +230℃
Upgradable up to + 300 ℃ when changed wiper, gasket and o-rings
|Easy connection to equipment||The system can be easily connected to the existing overhead stirrer, thermostat and vacuum pump.
(Not include overhead stirrer, thermostat and vacuum pump)
|What are the differences between Thin Film Evaporator and Short Path Evaporator?||1. Achievable Pressure
・TFE > 1m bar
・SPE > 0.01m bar
2. Heat Sensitivity TFE < SPE
3. Condensing Position See the left image"
|Evaporation Surface Area||0.05m²(DN60)，0.1m²（DN100)|
|Max. Temperature||+200°C(Jacket)，+300°C（Jacket） is also available.
＞PTFE Wiper：+200°C, PBI*Wiper: +300°C
|Operating Pressure||＞0.1 mbar|
|Feed rate||0.1 to 1.5kg/h (DN60), 0.3 to 3.0kf/h(DN100)|
|Max. visconsity at operating temperature||1,000mPas|
|Max. Rotation Speed||400rpm|
|・The parts that come into contact with fluid are made of borosilicate glass 3.3, PTFE, and SS316.
・Sealing: Magnetic coupling
・The system does not include overhead stirrer, circulator, chiller and vacuum pump.