Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. A representative will get in touch with you shortly.
Idex - Low Pressure Multiport Connectors - Y Connectors

PEEK Y Connectors are designed to split a stream or join two streams together, just like a tee. However, the configuration of a tee can lead to turbulent flow and solvent outgassing, which increases baseline noise and reduces sensitivity. The geometry of a Y connector creates less turbulence and thus can improve analytical results. All of these Y Connectors use 1/4-28 Flangeless fittings, except P-515 which uses 5/16-24 fittings (to accommodate larger tubing).

Key Features

Our PEEK Y Connector Assembly can split a stream or join two streams together similar to a "T" design. Unlike a "T" the geometry of the "Y" design reduces turbulence and improves analytical results.


List of available PEEK Y Connectors

Material Thread Port Configuration Swept Volume Thru hole Pressure Rating Max For tubing outer diameter
PEEK 1/4-28 Flat-Bottom 1.7 µL 0.020 inches/0.50 mm 1000 psi/69 bar 1/16 inches
PEEK 1/4-28 Flat-Bottom 6 µL 0.040 inches/1 mm 500 psi/34 bar 1/8 inches
PEEK 1/4-28 Flat-Bottom 13.6 µL 0.060 inches/1.50 mm 500 psi/34 bar 1/8 inches
PEEK 1/4-28 Flat-Bottom 47.7 µL 0.125 inches/3.20 mm 500 psi/34 bar 3/16 inches
  • Biopharmaceutical and Biotechnology
  • Chemical
  • Cosmetics & Personal Care
  • Education & Academics
  • Food & Beverage
  • Medical
  • Oil & Gas
  • Pharmaceutical
  • Powders & Pigments / Coating
[IDEX, Upchurch Scientific, Multiport, Connectors, Y, Low Pressure]