QATM - Benchtop Cut-off Machines

The Brillant 200 is an especially user-friendly wet abrasive cutting machine with manual cut-off. Opening the machine folds away the hood to the inside so that the whole cutting chamber is easily accessible. The round window opens a wide field of view during the cutting process.

The cutting wheel cooling is integrated directly into the wheel guarding cover. The large, stainless table is equipped with replaceable wearing plates. Transverse grooves allow optimized alignment of clamping vices (e.g. clamping vice 80).

Key features

• Manual vertical movement
• Large cutting chamber
• Opening on left- and righthand side for continuous long parts
• Large table with exchangeable wearing plates
• Hood covering complete width for optimal accessibility
• Easy operation
• Large range of different clamping tools and systems available
• Current safety standard with door interlocking system
• Solid aluminium case construction, powder coated

The Brillant 210A is a flexible precision cut-off machine to be used with cut-off wheels up to a diameter of 203 mm/8”.

The compact model is equipped with an automatic feed but also allows to perform cuts manually with a hand-lever. The optionally available clamping arm with a built-in force-sensor ensures low-deformation cuts thanks to a precise, force-controlled feed rate.

Thanks to the new feature “zone-cutting”, it is possible to adjust the feed-rate or cutting force individually to different areas of the sample for one cutting process. It reduces deformation and warming of the material, thus accelerating the preparation process.

No tools are required to mount the table attachment, which extends the range of applications, onto the machine. Further functionalities, like the selection of grinding mode or cooling system, make the Brillant 210A a universal abrasive-cutter for a wide range of applications and materials.

Key features

• Precision cutting machine
• Up to 5 different cut-off modes: manual, automatic feed, force-controlled feed, grinding mode, cutting with table attachment (depending on equipment)
• Force-controlled cutting (option)
• Table attachment (accessory)
• Automatic Y-axis (vertical movement)
• Zone-cutting feature
• 4 different cooling systems availabe
• 4.3" Touch-Screen with intuitive QATM user software
• 200 customized cutting programs storable
• LED illumination of cutting chamber
• Solid stainless steel housing, powder coated
• Soft-closing hood

The Brillant 220 is a compact, user-friendly precision wet abrasive cutting machine. It can be fitted with up to three automatic axes (X, Y, Z) and several cutting modes for maximum flexibility and ideal use of space.

With its modular construction and different options and clamping tools the cutting machine Brillant 220 can be easily equipped for specific applications. The fully automatic Brillant 220 is especially suited for precise cutting of small part of different geometries. Use of a vacuum sample holder allows cutting of thin sections and unmounted samples with a precision of 0.001 mm.

Key features

• Precision cutting machine
• Spacious cutting chamber with large table
• Openings on left and right for continuous long parts
• Electronic control with LC display
• Electronic travel measurement
• Electronic performance control
• Various cutting modes
• Memory function for saving programs
• Manual movement of all axis via joystick (automatic mode only)
• Current safety standard
• LED chamber illumination
• Large range of different clamping tools and systems available
• Solid aluminium case construction, powder coated

The Brillant 230 is a wet abrasive cut-off machine with fine dynamic, manual wheel movement into samples up to Ø 110 mm. The spacious cutting chamber allows various clamping variations. The solid aluminium design of the cutting machine comes with openings on the right and left hand side for cutting continuous long parts.

Key features

• Precise manual vertical movement
• Large cutting chamber
• Opening on left- and righthand side for continuous long materials
• Large table, individually adjustable in x-direction
• Sliding door and side door for superior accessibility
• User friendly
• Safety standard with door interlocking system
• Flange with ceramic protector
• Easy nut
• Cutting chamber illumination with LED flex light
• Large range of different clamping tools and systems available
• Solid aluminium case construction, powder coated

The Brillant 240 is a compact and flexible semi-automatic abrasive cut-off machine with a 254 mm/10” cut-off wheel for workpieces or samples up to Ø 95 mm. This machine combines the benefits and speed of a manual cut-off machine with the advantages of an automatic abrasive cutter.

The semi-automatic Brillant 240 equipped with an integrated hand lever with electromechanical lever brake. It can be operated with one hand and makes vertical cuts or the positioning of the cut-off wheel easier than before. The stainless steel cutting table can be used in manual mode by a hand wheel (traverse cut), or with a dynamic automatic drive. The latter allows the pulsed cut and the Care-Cut (oscillation cut for chop cuts). For more complex cutting tasks, the Brillant 240 can be equipped with an optional automatic cross table to perform serial cuts.

Key features

• Manual Y-axis with electromechanical lever brake
• Care-Cut: facilitates gentle cutting
• 7" Touch-Screen user interface with intuitive QATM user software
• Automatic travel X-axis - manual travel via hand wheel
• Cutting-force dependent feed control (X-axis)
• Superior LED illumination of cutting chamber
• Parallel setting of wheel guard during cutting sequences increases cutting capacity
• Opening on both sides for long parts

The Brillant 250 is an automatic wet abrasive cut-off machine for samples up to max. Ø 135 mm. Due to its low contact cutting (lcc) function, it gently cuts different types of samples with various geometries, sizes and materials.

The cut-off machine is commonly used in metallography, materialography, mineralogy, as well as for the cutting of composite materials (CFC/PMC/MMC) or electronic devices such as PCB’s.

The large cutting chamber and stainless steel table of the machine allow comfortable and flexible operation. A wealth of software based features, such as automatic touch detection, multi-position process and parallel setting of the wheel guard during vertical cutting further enhance the reproducibility of cutting processes.

Key features

• Manual or automatic horizontal movement (depends on equipment)
• Manual vertical movement
• Electronic control of cutting force
• Electronic control of distance (depends on equipment)
• Electronic cutting force limiter
• Memory for saving programs (depends on equipment)
• Large range of different clamping tools and systems available