A New Dimension in Particle Analysis
With the SYNC particle analyzer, Microtrac MRB integrates its highly accurate tri-laser diffraction analyzer technology with its versatile dynamic image analysis capability to provide particle characterization practitioners with a unique measuring experience. The patented synchronous measurement technology allows users to make both a laser diffraction measurement and an image analysis measurement on a single sample, in the same sample cell at the same time
The SYNC laser diffraction particle size analyzer is ideally suited for routine QC applications. It also provides valuable information to researchers as they develop new materials and processes. The powerful analyzer software provides both particle size distribution information as well as a multitude of morphological particle parameters. The patented BLEND routine allows users to examine materials over a wide range of sizes from 0.01 microns to 4000 microns.
|Measuring range||0.01 µm - 4 mm|
|Laser class||Red 780 nm, blue 405 nm
Class 1 laser product per CFR 1040.10 & IEC60825-1
|Laser power||Red laser 0.35 to 2 mW nominal
Blue laser 4-8 mW nominal
|Dimensions (W x H x D)||~ 820 x 460 x 500 mm (32.3 x 18.1 x 19.7 in)|
|Weight (Measuring unit)||FlowSync: 19.5kg (43lbs)
TurboSync: 13.6kg (30lbs)
Sync: 23.6kg (50.8lbs)
|Wet operation||Volume: 200 ml nominal
Flow rate: 0 to 65 ml/sec with water
Inlet pressure: 50 psig (345 kPa) maximum
|Dry operation||100 psi (689 kPa) maximum pressure
5 CFM (8.5 m3/h) at 50 psi (345 kPa) minimum flow rate
Free of dry contaminants, moisture and oil
|Image analysis||5.2 megapixel (2560 x 2048), 22 fps at max resolution|
|Measuring time||~ 10 to 30 seconds|
|Standards||Laser Diffraction (ISO 13320)
Dynamic Image Analysis (ISO 13322-2)
Representation of results of particle size analysis (ISO 9276-6)
Dispersion Module for Wet Measurements
The FLOWSYNC’s automated filling, de-aerating, pre-circulating and circulating operation means that each sample is handled with a consistency that improves the repeatability of particle size distribution and imaging data.
Dispersion Module for Dry Measurements
The TURBOSYNC delivers a properly dispersed sample to the measuring cell of the analyzer, allowing for consistent and repeatable analyses. A moving sample tray introduces the powder into the measurement system.
A leader in particle characterization
In 2020, the leading companies for particle characterization, RETSCH Technology, Microtrac and MicrotracBEL united and became one powerful brand: Microtrac MRB!
All three companies share a passion for making particle analysis more accurate, more effective and more convenient in order to exceed customers' expectations. Together, we at Microtrac MRB will continue to find superior solutions for every application and provide the best customer service!