Conforms to the specifications of
|
ASTM D943, D2274, D2893*, D4310, D6158; ISO 4263, 12205 AOCS CD12-57*; DIN 51586, DIN 51587; NF M 07-047; NF T 60-150
|
---|---|
Temperature Control Stability
|
±0.1°C (±0.2°F)
|
Oxygen Flow Rate
|
3L/h to each test cell, individually controlled
|
Bath Capacity
|
30-place model: 60 gal (227L) 60-place model: 114 gal (432L)
|
Constant temperature water baths for high volume oxidation stability applications. Provides temperature control, metered air flow and condenser water supply controls for as many as thirty or sixty cells in a single system, eliminating the need for multiple water and electrical feeds and oxygen supply tanks. Microprocessor PID control provides quick temperature stabilization without overshoot, and the bath is protected by a redundant overtemperature control circuit that interrupts power should bath temperature exceed a programmed cut-off point. Display provides actual setpoint temperature values in °C/°F format. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. A 6 or 12kW heat exchanger with heavy duty magnetic drive circulation pump provides rapid and uniform heat transfer throughout the bath. Bath liquid depth is automatically maintained within ASTM specified tolerances by an electronic water level control system. Two banks of individually controlled flowmeters maintain the required oxygen flow rate to each test cell, and condenser water control valves for each cell are mounted on manifolds along the sides of the bath. A centrally mounted trough collects condenser waste water for convenient disposal or recirculation through an external cooling device. Bath interior is constructed of heavy gauge welded stainless steel. All components are easily accessible for servicing if required. Supplied with a sturdy finished angle-iron frame for floor standing installation. Order oxidation cell glassware and accessories separately.
Conforms to the specifications of
|
ASTM D943, D2274, D2893*, D4310, D6158; AOCS CD12-57*; DIN 51586, 51587; ISO 4263, 12205; NF M 07-047; NF T 60-150
|
---|---|
Testing Capacity
|
12 oxidation cells
|
Maximum Temperature
|
450°F
|
Temperature Control Stability
|
±0.2°F (±0.1°C)
|
Air Flow Rate
|
3L/h
|
Constant temperature aluminum block oxidation bath with flowmeters and condenser water manifold for twelve cells. Insulated solid block design provides efficient operation at temperatures of up to 450°F (232°C). Microprocessor temperature control unit features digital setpoint and display and built-in overtemperature protection. Includes individual flowmeters and control valves for each cell, delivering air flow at the rate of 3L/h. Condenser water manifold has individual control valves for each cell. Order oxidation cell glassware and accessories separately.