Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. A representative will get in touch with you shortly.
Claind - UHP Air generator - AirGen GC

  • UHP Zero Air perfect for NPD, FID, FPD
  • Parallel connection up to 4 stacked generators with tower configuration
  • Modular configuration
  • Equipped with PSA dryer
  • Able to feed up to 8 FIDs
  • Platinum Palladium HC system for HCT integral removal < 0,1 ppm for an absolutely stable and disturbante free baseline
  • Easy integration with Brezza series dedicated air compressor (AirComp)
  • CPU with Touch Screen Display connectable with CAN-BUS to the generators (up to 32 units), allows the monitor of the operational status, menus with report alarms and functioning parameters. The CPU include also an Ethernet output for the connection to PCs
  • Technical Specifications

    Flow Rate 3000 NmL/min ± 10% a 2000 m slm
    Technologies Employed PSA CLAIND + catalytic reactor Pl/Pd
    Output Pressure 0 - 6 bar/0 - 87 psi ± 3%
    Purity HCT < 0,1 ppm
    Moisture < -50 °C dew-point ATP ± 2°C ATP
    Air Input Characteristics Particulate ≤ 0,01 mm
    Oil Vapors ≤ 0,01 mg/m3
    Moisture ≤ 3° C dew point ATP
    Min pressure: 8 bar/115 psi
    Air flow rate: 8 Nl/min
    Electrical Supply 115 Vac ±10% 60 Hz 250W
    230 Vac ±10% 50 Hz 250 W
    Index Of Protection IP20
    Noise < 50 dBA for the 98% of operation time
    < 60 dBA for 2 sec. each cycle
    Operating Temperature 5℃ fino 35℃ (41°F fino 95°F)
    Environmental Humidity max 90% without condensation
    Max Altitude 2000 m slm
    Dimensions Height : 40 cm + 7 cm/15.8” + 2.8”
    Width: 38 cm/14.9”
    Depth: 53 cm/20.8”
    Weight G28 kg/62 lbs
    Pneumatic Connections Compressed air inlet: G 1/8” female
    Purified air output: G 1/8” female
    • Aerospace
    • Agriculture
    • Automotive
    • Biopharmaceutical and Biotechnology
    • Chemical
    • Construction
    • Cosmetics & Personal Care
    • Defense
    • Die & Mould
    • Education & Academics
    • Electronics
    • Energy
    • Environmental
    • Food & Beverage
    • Luxury
    • Machinery & Manufacturing
    • Medical
    • Mining & Minerals
    • Oil & Gas
    • Optical
    • Paper & Wood
    • Pharmaceutical
    • Polymers, Plastics and Rubbers
    • Powders & Pigments / Coating
    • Railway
    • Semiconductor, Solar & Electronics
    • Service
    • Shipbuilding
    • Textile
    • Wholesale & Retail
    CLAIND srl

    Established in 1979, Claind produces hydrogen, nitrogen and zero air generators. Its headquarters is in Lenno, on the shores of Lake Como, where all product development, production and administration activities are carried out. The customers who Claind targets can be broken down into three main categories: analysis laboratories, food and beverage companies and laser cutting companies.

    Over the years Claind's staff has received and paid back the confidence of more than 3,000 customers with over 20,000 installations worldwide.

    The principle that guides every business decision is the desire to achieve customer satisfaction, in this way strengthening a relationship based on trust that goes far beyond mere contacts for technical and commercial aspects.

    [ AirGen GC, airgen, gc, UHP Air generator, claind]