Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. For any adverse event reporting, please send an email to adverse.hec@dksh.com.

The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

The basis of the escomatic D5 CNC is identical with the one of the escomatic D2 CNC. Machine base, straightening unit, feed system and rotating tool head are absolutely identical with the D2. On the escomatic D5 CNC the counter collet of the D2 has been replaced by a system for the front machining which consists of a cross table with 2 axes supporting 2 drilling spindles, one threading/tapping spindle and one counter collet with programmable positioning.

The CNC control allows for flexible and optimized manufacturing of turned parts without cycle time loss. The advantages of cam driven machines are maintained. The very simple programming system which is based on the experience of operators allows all operators to learn to operate and program the machine within a few hours.

Technical Specification

Coolant/Cutting Fluid Oil
Tank capacity 70 litre
Flow rate of the pump 7 L/min
Max system pressure 4.5 bar
Chips container capacity 15 litre
Installed power 4 kVA
Compressed air consumption 7 m³/H
Compressed air pressure 5 bar
Length x Width x Height 1350 (mm) x 770 (mm) x 1380 (mm)
L x W x H with coil reel 2200 (mm) x 770 (mm) x 1380 (mm)
Net weight 850 kg
Gross Weight 1050 kg

Available models

D5 Ultra, D5Twin, D5CNC
Technical Specifications
Coolant/Cutting Fluid
Oil
Tank capacity
70 litre
Flow rate of the pump
30 L/min
Max system pressure
10 bar
Chips container capacity
40 litre
Installed power
4 kVA
Compressed air consumption
7 m³/H
Compressed air pressure
5 bar
Length x Width x Height
2150 (mm) x 1050 (mm) x 1580 (mm)
L x W x H with coil reel
2750 (mm) x 1050 (mm) x 1580 (mm)
Net weight
1150 kg
Gross Weight
1250 kg
Escomatic D5 Twin
Technical Specifications
Coolant/Cutting Fluid
Oil
Tank capacity
100 litre
Flow rate of the pump
30 L/min
Max system pressure
10 bar
Chips container capacity
40 litre
Installed power
4 kVA
Compressed air consumption
7 m³/H
Compressed air pressure
5 bar
Length x Width x Height
2150 (mm) x 1050 (mm) x 1580 (mm)
L x W x H with coil reel
2750 (mm) x 1050 (mm) x 1580 (mm)
Net weight
1150 kg
Gross Weight
1250 kg

Key Features

  • Proven escomatic technology with menu guided CNC control system
  • Menu guided programming / set-up and quick process adaption
  • Escomatic standard turning tools can be used
  • Tool head speed up to 12’000 RPM
  • Fast cycles and short machining times at enhanced precision
  • Best price / performance ratio for the production of parts with small diameters
  • Improved parts quality, both in meeting tolerances and in surface finish
  • Reduction of labour costs due to fewer machine stops by using material from coil, real 24h operation
  • Economy of floor space due to compact design of the unit „machine & coil stand“
  • Easy and simple set up and operation due to the absence of cams
  • Turning speeds, feed rates and cutting speeds are freely programmable
  • Turning without form tools
  • Aerospace
  • Automotive
  • Machinery & Manufacturing
  • Energy
  • Semiconductor, Solar & Electronics
[CNC Lathe machine, best turning machine, watch component turning machine, electronic connector turning machine, electronic component turning machine, turning machine]