Save interesting pages while you browse the DKSH website via the basket icon on the bottom of the page. You will find the pages you saved in this area again.
Save interesting documents while you browse the DKSH website via the basket icon next to the download links. You will find the documents you saved in this area again.
Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.
Do you really want to delete all documents?
This action can not be undone.
Please leave a message
Eileen Choo, Assistant General Manager
Michael Dela Paz, Managing Director
Contacting Conductivity Electrode Sensor
This Contacting Conductivity sensor head is part of the AdvantEDGE probe system that allows a direct connection to a PLC for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box. A LD500 local display can be used if desired. Sensor heads are pre-calibrated and can be replaced or exchanged with any other type of sensor without taking the system down. Save space, time and money.
|Measurement System Performance||Range: 0 to 2,000,000 uS/cm (2 S/cm) Resolution: 4.5 significant digits Accuracy: 0.1% of reading Step Response Time: 90% in 30 seconds Note: Typical at 25°C Performance unaffected by cable length|
|Operational Environment||Temperature Range: -5°C to 95°C Maximum Pressure: 85 psi @ 50°C Maximum Flow Rate: 10 ft/second|
|Power Requirements||Voltage Range: 10 to 30 VDC Maximum Power: 200 mW Typical Power: 120 mW Note: Class II DC power supply required|
|Approvals and Ratings||Immunity & Emissions: CE (EN61326 and EN61326:1998) Safety: CE (EN 61010-1) UL 508 Hazardous Locations: UL Class I, Division 2|
|Construction||Cell Constants: 0.1 for Resistivity 1.0 and 5.0 for Conductivity O-Rings: Viton® (other materials available) Electrode Material: Titanium (Standard) or 316 Stainless Steel Weight: 1.2 lbs|
|Units of Measure||Measurement Units: μS/cm, TDS, %, MΩ • c Temperature Units: °C, °F|
|Calibration||Zero: In dry air Span: 1 point Temperature: 1 and 2 point Note: Conductivity and temperature are precalibrated at the factory|
|Other Configuration Options||Sensor Filter: 0 to 100 seconds Temperature Filter: 0 to 100 seconds Concentration Table: User 10-point|