Save interesting pages while you browse the DKSH website via the basket icon on the bottom of the page. You will find the pages you saved in this area again.
Save interesting documents while you browse the DKSH website via the basket icon next to the download links. You will find the documents you saved in this area again.
Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.
Do you really want to delete all documents?
This action can not be undone.
Please leave a message
Eileen Choo, Assistant General Manager
Michael Dela Paz, Managing Director
This pH sensor head is part of the AdvantEDGE probe system that allows a direct connection to a PLC for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box. A LD500 local display can be used if desired. Sensor heads are pre-calibrated and can be replaced or exchanged with any other type of sensor without taking the system down. Save space, time and money.
|Measurement System Performance||Range: 0 to 14 pHResolution: 0.01 pHAccuracy: 0.014 pHStep Response Time: 90% in 30 secondsNote: Typical at 25°CPerformance unaffected by cable length|
|Operational Environment||Temperature Range: -5°C to 95°CMaximum Pressure: 100 psi @ 95°C 85 psi @ 75°CMaximum Flow Rate: 10 ft/second|
|Power Requirements||Voltage Range: 10 to 30 VDCMaximum Power: 200 mWTypical Power: 120 mWNote: Class II DC power supply required|
|Approvals and Ratings||Immunity & Emissions: CE (EN61326 and EN61326:1998)Safety: CE (EN 61010-1) UL 508Hazardous Locations: UL Class I, Division 2|
|Construction||Process Electrodes: “G”, “HF” or Low Temperature GlassGround Rod: Titanium, 316 Stainless Steel or Hastelloy CO-Rings: Viton® (other materials available)|
|Units of Measure||Measurement Units: pH, mVTemperature Units: °C, °F|
|Calibration||Automatic Buffer: 1 and 2 pointSample: 1 and 2 pointTemperature: 1 and 2 pointNote: pH and temperature are precalibrated at the factory|
|Temperature Compensation Options||Linear: % per °CBuilt-in tables: Ammonia or MorpholineNote: Temperature can be entered manually|
|Other Configuration Options||Sensor Filter: 0 to 100 secondsTemperature Filter: 0 to 100 secondsAuto Calibration BufferStandards: (4, 7, 10) and DIN 19267|