Save interesting pages while you browse the DKSH website via the basket icon on the bottom of the page. You will find the pages you saved in this area again.
Save interesting documents while you browse the DKSH website via the basket icon next to the download links. You will find the documents you saved in this area again.
Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.
Do you really want to delete all documents?
This action can not be undone.
Please leave a message
Eileen Choo, Assistant General Manager
PEEK Y Connectors are designed to split a stream or join two streams together, just like a tee. However, the configuration of a tee can lead to turbulent flow and solvent outgassing, which increases baseline noise and reduces sensitivity. The geometry of a Y connector creates less turbulence and thus can improve analytical results. All of these Y Connectors use 1/4-28 Flangeless fittings, except P-515 which uses 5/16-24 fittings (to accommodate larger tubing).
Our PEEK Y Connector Assembly can split a stream or join two streams together similar to a "T" design. Unlike a "T" the geometry of the "Y" design reduces turbulence and improves analytical results.
List of available PEEK Y Connectors
|Material||Thread Port Configuration||Swept Volume||Thru hole||Pressure Rating Max||For tubing outer diameter|
|PEEK||1/4-28 Flat-Bottom||1.7 µL||0.020 inches/0.50 mm||1000 psi/69 bar||1/16 inches|
|PEEK||1/4-28 Flat-Bottom||6 µL||0.040 inches/1 mm||500 psi/34 bar||1/8 inches|
|PEEK||1/4-28 Flat-Bottom||13.6 µL||0.060 inches/1.50 mm||500 psi/34 bar||1/8 inches|
|PEEK||1/4-28 Flat-Bottom||47.7 µL||0.125 inches/3.20 mm||500 psi/34 bar||3/16 inches|