Wiggens Incubators

Key Features:

• 6 Sides Direct Heating System
  • ​Electric Heating wire is covered on all sides of chamber which makes stable uniformity and provides fast heat-up & temperature recovery. 3 parts of heating section are controlled and calibrated individually by 3 temperature sensors.

• Dry Wall and Air Jacket
  • Warm Air from heating wire is preserved in space between chamber and insulation. It helps temperature recovered faster and minimize heat loss. Dry wall with insulation is not required to regular maintenance.

• DUAL BEAM IR C02 Sensor
  • ​Fast & Precise Detection for C02 gas regardless of temperature and humidity.

• Natural Humidication using Water Tray
  • ​The heater on bottom side warm the water in tray and it makes humidication. Circulation fan deliver the moisture formed from the water in entire chamber.

• No Condensation
  • ​Heating by front door heater & frame heater prevent condensation in chamber and on glass door.

• Microprocessor PID Control
  • ​Intelligence Control for C02 density, Temperature, Alarm, Automatic Decontamination(Optional).

Key Features:

* Applicable in life-science, pharmacy, medical science, chemistry, biology, and related fields for storage of samples which need a constant temperature and incubation
* Digital temperature display and control
* PID controller for temperature stability and safety protection
* Very good heating characteristics
* Ecologically friendly
* Easy to clean
* Timer function with possible setting of start time and duration
* 3 pre-programmed often used temperature settings
* Can be opened anytime when necessary
* Temperature measure unit can be set as either °C or °F
* When the temperature exceeds set levels and reaches the set safety value, an alarm activates, power is cut off, and the incubation process stops
* The material of the observation window is tempered glass, which has good safety and sealing characteristics
* The magnetic door and high-quality gasket can absorb external shocks and compriseexcellent sealing characteristics
* Easy to clean stainless steel shelves with good air permeability and adjustable height
* In case of temperature deviations, the BIAS function sets in, which makes operation convenient
* For the case of an unexpected power breakdown the incubator offers two working options: Automatic re-operation and automatic stop
* Upon opening the incubator, a light turns on, and the fan and heating device stop operation
* Alarm sound for sample protection sets in when the door is open for more than 60 seconds

Key Features: 

* Applicable in life-science, pharmacy, medical science, chemistry, biology, and related fields for storage of samples which need a constant temperature and for incubation
* Digital temperature display and control
* PID controller for temperature stability and safety protection
* Stainless steel shelves
* Very good heating characteristics
* Ecologically friendly
* Easy to clean
* Timer function
* Heating function start and duration can be pre-set
* Temperature control programs: Temperature programs can be divided into 9 ections and for every section temperature and duration can be set individually
* 3 pre-set often used temperatures
* Can be  opened anytime when necessary
* Temperature measure unit can be set as either °C or °F
* When the temperature exceeds set levels and reaches the set safety value, an alarm activates, power is cut  off, and the incubation process stops
* A professional controller adjusts the circular fans inside and regulates the defrosting cycle
* An observation window made of tempered glass is installed, which makes the examination of samples easy and convenient, and which does not lead to unnecessary disruptions of the incubation process
* The magnetic door and high-quality gasket can absorb external shocks and compriseexcellent sealing characteristics
* The stainless steel shelves have a good air permeability, are easy to clean and can be adjusted in height
* When temperature deviation occurs, the BIAS function sets in, which makes operation convenient
* For the case of an unexpected power breakdown the incubator offers two working options: Automatic re- operation and automatic stop
* When opening the incubator, a light turns on, and the fan and heating device stop operation. After one minute without closing the door an alarm sets in
* The WH-11CA and the WH-21CAincubators use heat transfer method for circulation. In aseparated room outside the work space it uses heat exchange, in the working space it usesnatural convection and forced circulation
* The circulation method will not induce air pollution and can guarantee exact temperaturedistribution
* Software for temperature control is optionally available

Operating Features: 

* From +15℃ above room temperature to 250℃ .
* Microprocess PID control / Auto-tuning / Calibration.
* Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF.
* Over temperature limit protection / Door opening alarm.
* Conveniently preset 3 most commonly used temperature settings without auto-tuning.
* Digital LED display (1℃ resolution) with touch keypads

Constructional Features:

* Gravity-flow convection with vertical air flow for uniform sample heating.
* Threefold tempered glass viewing window allows for easy monitoring of samples. (optional)
* Fully insulated dual-wall door opens 180 degrees & featuring a pull down door handle.
* Rounded inner chamber corners for easy cleaning and better air-flowing.
* Corrosion-resistant incoloy sheath heater and stainless steel interior.
* Two circular adjustable top slide vents helps to control inner air vapor circulation. (38mm / 1.5˝ in dia.)
 

Shaking Features:

* Dual shaking modes: orbital or reciprocating action.
* Speed range: 10 to 300 rpm.
* Programmable shaking motion.
- Timer range: 10 sec to 999 hr 59 min 59 sec.
- Forward & Backward, Pause: 10 sec to 59 min 59 sec.
* Selectable orbit diameter or stroke length: 20, 30, 40mm.
* Operating Features
* Temperature control:
* +5℃ above ambient to 60℃ . (for WS-300 and WS-600)
* +15℃ to 60℃ . (for WS-300R and WS-600R)
* Microprocessor PID control.
* Simple calibration and auto-tuning functions.
* Digital timer with Delayed ON/OFF function: 1 min to 99 hr 59 min.
* High temperature limit setting and open door alarm.
* Convenient preset function for 3 most commonly used temperature settings.
* Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each pro_le.
* Adjustable 3-step fan speed with defrosting time and period control.
* Intuitive control panel with bright LED display (0.1℃ resolution) and touch-sensitive keypad.
* RS-232 interface.

Constructional Features:

* Maintenance-free and durable BLDC motor.
* High-velocity fan ensuring uniform temperature distribution and rapid thermal recovery.
* Convenient sample monitoring thanks to the transparent acryl lid and the _uorescent lamp.
* Gas spring lid supports providing soft closing, smooth motion, and stopping.
* Environment-friendly CFC-free refrigerant.