Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?
×

Invalid Captcha
Thank you for downloading our white paper. You will receive an email soon with a link to the pdf.

Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text Intro text

Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description: Product description:

Technical Specifications

Flow Rate 200/400/600 Nml/min ± 10% a 2000 m slm (possibility to connect in parallel up to 4 stacked generators)
Technologies Employ HT PEM electrolytic cell
Output Pressure 2 - 8 bar ± 3% /30 - 116 psi ± 3%
Purity 99,9999 %
Oxygen < 1 ppm
Moisture Better than -70℃ dew-point ATP at 20℃
Requirements of Demineralized Water Required resistivity >1 MΩ cm @25°C; ASTM Type II
Advised resistivity >10 MΩ cm @25°C; ASTM Type I
Electrical Supply 115/230 VAC (+/- 10%) 50-60 Hz
HyGen 200: 110W
HyGen 400: 180W
HyGen 600: 250W
Index Of Protection IP20
Noise < 50 dBA
Operating Temperature 5℃ - 35℃ / 40°F - 95°F
Environmental Humidity max 90% without condensation
Max Altitude 2000 m slm
Dimensions Height: 40 cm + 7 cm (base) /15.8” + 2.8”
Width: 38 cm/14.9”
Width: 38 cm/14.9”
Weight 30 kg/67 lbs
Pneumatic Connections Hydrogen output : G 1/8” female AISI 316
Exhaust: quick coupling for plastic pipe 4 mm
Input demineralized water: flexible hose with 1⁄4” connection
Warranty 2 years

Available models section heading:

DKSH-Claind-NiGen-LCMS-100
Technical Specifications
Flow Rate
NiGen LCMS 100 : 100 Nl/min ± 10% a 2000 m asl
Technologies Employ
PSA CLAIND
Output Pressure
0 - 7 bar/0 - 100 psi ± 3%
Purity
up to 99.9%
Compressor
Only in the version 40-1
Air Input Characteristics
Particulate ≤ 0,01 µm Oil vapors ≤ 0,01 mg/m3 Moisture ≤ 3° C dew point min pressure: 8.5 bar/120 psi max pressure: 10 bar/145 psi
Electrical Supply X Lcms 100
115/230 Vac ± 10% 60/50 Hz 50 W
Index Of Protection
IP20
Noise
< 50 dBA during the stand by of the compressor < 65 dBA with compressor running
Operating Temperature
5°C fino 35°C (41°F fino 95°F)
Environmental Humidity
max 90% without condensation
Dimensions
Height: 132 cm/52” Width: 44 cm/17.3” Depth: 110 cm/43.3”
Weight
200 kg/444 lbs
Pneumatic Connections
Compressed air inlet: G 1/4” female Nitrogen output: G 1/4” female

 

Features:

  • Designed to satisfy the needs of all LCMS analyzers on the market
  • The PSA technology with molecular sieves, used in the NiGen series, are drastically reducing the O2 and H2O residual but also the HC presence in the air, offering an extremelly pure nitrogen output (phthalate-free)
  • Highly reliabile Air compressor with maintenance required only after 14,000 hours of work
  • Able to supply up to 4 LC-MS analysers 
  • The 50 lt each of air and nitrogen internal storage tanks mean less frequent air compressor starts, hereby reducing noise levels and maintenance
  • CPU with Touch Screen Display allows the monitoring of operational status and menus with report alarms and functioning parameters
NiGen LCMS 40-1
Technical Specifications
Flow Rate
NiGen LCMS 40-1 : 38 Nl/min ± 10% a 2000 m asl
Technologies Employ
PSA CLAIND
Output Pressure
0 - 7 bar/0 - 100 psi ± 3%
Purity
up to 99.9%
Compressor
Only in the version 40-1
Air Input Characteristics
Particulate ≤ 0,01 µm Oil vapors ≤ 0,01 mg/m3 Moisture ≤ 3° C dew point min pressure: 8.5 bar/120 psi max pressure: 10 bar/145 psi
Electrical Supply X Lcms 40-1
115 Vac ± 10% 60 Hz 1,9 kW 230 Vac ± 10% 50 Hz 1,6 kW
Index Of Protection
IP20
Noise
< 50 dBA during the stand by of the compressor < 65 dBA with compressor running
Operating Temperature
5°C fino 35°C (41°F fino 95°F)
Environmental Humidity
max 90% without condensation
Dimensions
Height: 132 cm/52” Width: 44 cm/17.3” Depth: 110 cm/43.3”
Weight
220 kg/489 lbs
Pneumatic Connections
Compressed air inlet: G 1/4” female Nitrogen output: G 1/4” female

Features: 

  • Designed to satisfy the needs of all LCMS analyzers on the market
  • The PSA technology with molecular sieves, used in the NiGen series, are drastically reducing the O2 and H2O residual but also the HC presence in the air, offering an extremelly pure nitrogen output (phthalate-free)
  • Highly reliabile Air compressor with maintenance required only after 14,000 hours of work
  • Able to supply up to 4 LC-MS analysers 
  • 40-1 version with special built-in full oil-free compressor
  • The 50 lt each of air and nitrogen internal storage tanks mean less frequent air compressor starts, hereby reducing noise levels and maintenance
  • CPU with Touch Screen Display allows the monitoring of operational status and menus with report alarms and functioning parameters
 Nigen HF-1
Technical specifications
Flow rate
6 Nml/min ± 10% a 2000 m asl
Technologies employ
PSA CLAIND
Output pressure
0 - 7 bar/0 - 100 psi ± 3%
Purity
> 99,9995 %
Oil free compressor
Included
Electrical supply
115 Vac ±10% 60 Hz 200 W 230 Vac ±10% 50 Hz 200 W
Index of protection
IP20
Noise
< 50 dBA during the stand by of the compressor
Operating temperature
5°C fino 35°C (41°F fino 95°F)
Environmental humidity
max 90% without condensation
Dimensions
Height: 132 cm/52” Width: 44 cm/17.3” Depth: 110 cm/43.3”
Weight
220 kg/489 lbs
Pneumatic connections
Compressed air inlet: G 1/4” female Nitrogen outlet: G 1/4” female

Features:

  • PSA molecular sieve technology dedicated to offer UHP Nitrogen for GC and ICP
  • CLAIND "Fast Purity“ patent that allows the delivery of high-purity nitrogen within 30 minutes
  • Built-in compressor  oil free including 2 x 50 l. tanks for Compressed Air and Nitrogen
  • Highly reliable Air compressor with maintenance required only after 14,000 hours of work
  • 2 gas outlets : available: UHP Nitrogen and Oil Free Air
  • CPU with Touch Screen Display  allows the monitoring of operational status and menus with report alarms and functioning parameters.
  • Equipped with full turn wheels for easy moving
Nigen GC
Technical specifications
Flow rate
500 Nml/min ± 10% a 2000 m asl
Technology
PSA CLAIND
Output pressure
0 - 6 bar/0 - 87 psi ± 3%
Purity
> 99,9995 %
Moisture
< -50 °C dew-point ATP ± 2°C ATP
Air input characteristics
Particulate ≤ 0,01 mm Oil vapors ≤ 0,01 mg/m3 Moisture ≤ 3° C dew point ATP min pressure: 8 bar Air flow rate: 6 Nl/min
Electrical supply x nigen gc
115/230 Vac ±10% 60-50 Hz 50 w
Electrical supply x nigen gc hc
115 Vac ±10% 60 Hz 200 W 230 Vac ±10% 50 Hz 200 W
Index of protection
IP20
Noise
< 50 dBA for the 98% of operation time < 60 dBA for 2 sec. each cycle
Operating temperature
5°C - 40°C/40°F - 100°F
Environmental humidity
max 90% without condensation
Max altitude
2000 m asl
Dimensions
Height: 40 cm + 7 cm/15.8” + 2.8” Width: 38 cm/14.9” Depth: 53 cm/20.8”
Weight
GC version: 28 kg/62 lbs GC HC version: 32 kg/70.5 lbs
Pneumatic connections
Compressed air inlet: G 1/8” female Nitrogen outlet: G 1/8” female

Features:

  • High purity nitrogen guaranteed by the PSA technology
  • CLAIND "Fast Purity" patent that allows the delivery of high purity nitrogen in a very short time
  • UHP PSA technology available in a standard version and the HC version which ensures 100% removal of hydrocarbons (HCT< 0,1 ppm for applications with high-sensivity detectors)
  • Parallel connection up to 4 stacked generators with tower configuration
  • Modular configuration
  • Facility to serve up to 12 FIDs/NPDs with makeup gas or up to 7 ECDs oppure 5 S/S
  • Facility for integration with a Brezza series dedicated air compressor (AirComp)
  • CPU with Touch Screen Display connectable with CAN-BUS to the generators (up to 32 units), allows the monitoring of operational status and menus with report alarms and functioning parameters

Products we offer

• Zwilling JA Henckels knives and manicures sets, cutlery, cookware and accessories
• Zyliss Swiss designed kitchen gadgets and tools
• Microplane USA kitchen graters and slicers
• Cole & Mason Salt & pepper grinders
• Marcato Italian pasta machines and accessories
• Progressive kitchen tools and accessories
• Chef'n kitchen gadgets and salt & pepper grinders
• Alligator Brand slicers and choppers
• EuroLine kitchenware and serving accessories
• Metaltex kitchenware
• Staub French cast iron cookware
• MSC Canada kitchen and giftware
• Cuisena kitchen tools and accessories
• Culinare kitchen tools and gadgets
• Contigo drink bottles, sports bottles and travel mugs
• Tavola Swiss coffee capsule holders
• Tala a range of classic English inspired kitchenware and bakeware
• Neato Robot Vacuums
• Miyabi, traditional Japanese made knives by Zwilling J.A.Henckels
• Jamie Oliver kitchenware gadgets and storage

• Bovet
• Davidoff
• Maurice Lacroix
• West End Watch Co.

  • It is athe perfect tool to work with a frozen food concept, with no waste. Ideal for small shops
  • Reheat all kinds of chilled pastries in an extremely fast way
  • Chemical
  • Education & Academics
  • Food & Beverage
  • Oil & Gas
[gas, generator, claind, nitrogen, hydrogen]