The new types of Incubator of DAIHAN are outfitted with high performance heating mechanism that is optimized respectively for capacity of chamber, power of heating element and air circulation type (Gravity Convection or Forced Convection).
The temperature displayed on the controller is accurately consistent with the actual temperature in the very center of the chamber or the average temperature in the entire area of the chamber, which maintains precisely within fluctuation specification. In addition, the temperature in the entire area of the chamber shows a very high stability keeping within a very slight variation specification in terms of temperature uniformity. Simultaneously, through the optimization of Fuzzy-PID controller, the “heat-up time” to reach the set temperature after operating and the “recovery time” to get back to the set temperature after opening and closing of the door are very short.
The newly developed high-performance heating mechanism, has achieved high degree of temperature accuracy and uniformity in the chamber. This is achieved by the heating elements installed on three sides – that is, the left, right and bottom parts of a chamber – which directly heat the stainless – steel chamber. This either enhances its material thermal conductivity to maximum (in case of the Incubator) or the heated air from the pre-heating zone in air-jacket type that is built in the three sides outside a chamber circulates first (in case of the Oven).
ThermoStable™ IF Incubators, Forced Convection-type, 50-/105-/155 Lit., with Certi. & Traceability With 2×Wire Shelves, Digital Fuzzy Control, Jog-Dial with Push Button, Digital LCD with Backlight, up to 70℃, ±0.2℃
ThermoStable™ IG Incubators, Gravity Convection-type, 32-/50-/105-/155 Lit., with Certi. & Traceability With 2×Wire Shelves, Digital Fuzzy Control, Jog-Dial with Push Button, Digital LCD with Backlight, up to 70℃, ±0.2℃
Multi-Room Incubator, “WIM”, Forced Convection-type, 125 Lit.×4 Rooms, with Certi. & Traceability with 8×Wire Shelves, Digital Fuzzy Control, Independent Chamber Control, Max. Temp. Uniformity & Accuracy, up to 70℃
ThermoStable™ GC SMART Plant Growth Chamber, Smart-Lab™ System, 432-/864- Lit. with Smart-Lab™ Controller, CFC-Free, 0~12,000 - or 15,000-Lux, 30~95% RH, 10~60℃, with Certi. & Traceability
ThermoStable™ IS-30 Precise Shaking Incubators, Front Door-type, up to 60℃, ±0.2℃ with Universal Platform, Fuzzy Control, Orbital Motion, Advanced Shaking Mechanism, Precise Speed Control, 30~250 rpm
Economic Temp./Humidity Chamber, “WTH-E”, 155-/305-/420-/800-Lit. Digital PID Control, Programmable, Low Water Level Alarm, -20℃ ~80℃ ±0.3 ℃, up to 95% RH
4~45℃ personal low temperature incubator “ThermoStableTM DLI-C20”, 20 Lit., compact design with digital micro processor PID control, auto tuning, peltier element module, 2 step operation.
Key Features
- Cooling and heating by using thermoelectric semiconductor element
- Minimizes noise (<20dB) and power consumption
Specifications
Capacity | 20 Lit. |
Air flow-type | Natural-air type |
Temp. range & accuracy | 4~45℃ (controlled by 0.1℃), ±0.2℃ |
Temp. uniformity | ±0.2℃ at 37℃ |
Condensate drainage | Natural evaporation |
Shelf | Included 1Ea. ABS shelf, 213×260×8mm |
Material | Internal & external : ABS resin |
Dimension |
Interior: 213×265×360mm Exterior: 270×330×510mm |
Power consumption | 56W |
Power supply | AC 90V–240V, 50/60Hz |