Thanks to the built-in UniBloc AP integrated aluminum mass sensor and an optimized control system, this balance achieves high-speed measurements with a response as quick as 2 seconds. Featuring an easyto-read organic EL display, it has been redesigned for excellent operability. The AP-W series is equipped with a function to automatically calculate the weight values required for sample concentration preparation, which supports routine weighing operations.
Response Time for Trace Measurements* | 2 sec. | |
---|---|---|
USB Device (Type B) | Included | |
Operating Temperature/Humidity Range | 5 to 40°C 20 to 85%** | |
Sensitivity Stability Against Temperature Range | ±2 ppm/°C (10 to 30°C) | |
Pan Size | ø91 mm | |
Display | OEL display (dot matrix) | |
*The response time for displaying 90% of added sample amount value in trace measurements (from 1mg) **Non-condensing |
Features of AP225W
Model | Capacity | Minimum Display | External Calibration Weight Range for Span |
Repeatability (for Low Loads) |
Minimum Weight*2 |
Linearity*2 | Response Time *4 |
Input / Output Terminal |
Body Dimensions |
Weight |
---|---|---|---|---|---|---|---|---|---|---|
AP225W | 220 g | 0.01 mg | 95 to 220.00090 g (200 g) |
0.01 mg (5 g low loads) | 20 mg | ±0.1 mg | 8 sec | RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer (Optional) |
Approx. 212 (W) × 367 (D) × 345 (H) mm (power supply unit included) |
Approx. 7.9 kg |
AP135W | 135 g | 0.01 mg | 45 to135.00090 g (100 g) | 0.015 mg (5 g low loads) | 30 mg | ±0.1 mg | 8 sec | |||
AP125WD | 120 g / 52 g | 0.1mg / 0.01mg | 45 to 120.00090 g (100 g) | 30 mg | ±0.2 mg / ±0.05 mg | 2 sec. / 8 sec. | ||||
AP225WD | 220 g/102 g | 0.1mg / 0.01mg | 95 to 220.00090 g (200 g) | 30 mg | ±0.2 mg / ±0.1 mg | 2 sec. / 8 sec. | ||||
AP124W | 120 g | 0.1 mg | 45 to 120.009 g (100 g) |
0.1 mg (5 g low loads) | 200 mg | ±0.2 mg | 2 sec. | Approx. 212 (W) × 367 (D) × 345 (H) mm | Approx. 7.0 kg | |
AP224W | 220 g | 0.1 mg | 95 to 220.009 g (200 g) |
0.1 mg (10 g low loads) | 200 mg | ±0.2 mg | 2 sec. | |||
AP324W | 320 g | 0.1 mg | 95 to 320.009 g (300 g) |
0.1 mg (20 g low loads) | 200 mg | ±0.3 mg | 2 sec. |
*1 Minimum display 0.01mg models provide two internal weights as standard
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use
*4 The response time value is typical
Model | Capacity | Minimum Display | External Calibration Weight Range for Span | Repeatability (for Low Loads) | Minimum Weight *2 | Linearity*2 | Response Time *4 | Input / Output Terminal | Other Included Features |
Body Dimensions | Weight |
---|---|---|---|---|---|---|---|---|---|---|---|
AP124X | 120 g | 0.1 mg | 45 to 120.009 g (100 g) | 0.1 mg (5 g low loads) | 200 mg | ±0.2 mg | 2 sec | RS-232C (D-sub 9P plug) USB device (Type B) Ionizer (Optional) |
mol Conversion Function, Inspection Support Function, Clock-CAL |
Approx. 212 (W) × 367 (D) × 345 (H) mm | Approx. 7.0 kg |
AP224X | 220 g | 95 to 220.009 g (200 g) | 0.1 mg (10 g low loads) | ||||||||
AP324X | 320 g | 95 to 320.009 g (300 g) | 0.1 mg (20 g low loads) | ±0.3 mg |
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use
*4 The response time value is typical
Model | Capacity | Minimum Display | External Calibration Weight Range for Span |
Repeatability (for Low Loads) | Minimum Weight*2 | Linearity*2 | Response Time *4 | Input / Output Terminal |
Body Dimensions | Weight |
---|---|---|---|---|---|---|---|---|---|---|
AP124Y | 120 g | 0.1 mg | 45 to 120.009 g (100 g) | 0.1 mg (5 g low loads) | 200 mg | ±0.2 mg | 2 sec | RS-232C (D-sub 9P plug) USB device (Type B) |
Approx. 212 (W) × 367 (D) × 345 (H) mm | Approx. 6.5 kg |
AP224Y | 220 g | 95 to 220.009 g (200 g) | 0.1 mg (10 g low loads) | |||||||
AP324Y | 320 g | 95 to 320.009 g (300 g) | 0.1 mg (20 g low loads) | ±0.3 mg |
*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use
*4 The response time value is typical
"Contributing to Society through Science and Technology"
Based on this corporate philosophy that represents the pioneering spirit inherited from our founder, Shimadzu Corporation has continued to develop all our businesses for over 140 years since its foundation in Kyoto in 1875.
Our analytical and measuring instruments, and industrial machinery are now used for a broad range of applications in a wide variety of industries, where they serve society by providing confidence and convenience through the business operations of our customers.