Save interesting pages while you browse the DKSH website via the basket icon on the bottom of the page. You will find the pages you saved in this area again.
Save interesting documents while you browse the DKSH website via the basket icon next to the download links. You will find the documents you saved in this area again.
Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.
Do you really want to delete all documents?
This action can not be undone.
DKSH Technology Pte Ltd.
DKSH South East Asia Pte Ltd.
625 Toa Payoh Lorong 4
#03-00, Singapore 319519
DKSH Technology Pte Ltd: +65 6274 1222.
DKSH South East Asia Pte Ltd: +65 6222 0232 (Luxury & Watches)
|Monday to Friday, 8.00am - 5.30pm (SGT)|
Please leave a message
Kelvin Low, Senior Manager
Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0 Cu. ft./hr.). Test panel shafts ride on ball bearing spindles driven by a 1⁄15hp motor. A counterbalanced support bar positions the drive shaft for testing or for mounting and removal of test panels. When the support bar is raised, a safety microswitch automatically stops the drive motor to prevent splashing of hot oil. Fully insulated bath features double-wall stainless steel construction, with a built-in support rack to suspend test cells vertically at the proper depth. Microprocessor PID control provides quick temperature stabilization without overshoot, and the bath is protected by an overtemperature control circuit that interrupts power should bath temperature exceed a programmed cut-off point. Dual LED displays provide actual and setpoint temperature values in °C/°F format. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. A 1⁄20hp stirrer thoroughly circulates the bath medium for temperature uniformity. Redundant overtemperature protection is provided by a built-in backup thermostat. Flowmeters and valves mounted on a convenient manifold provide individual air flow control for each test cell.
|Conforms to the specifications of||FTM 791-5321|
|Testing Capacity||6 lubricant samples|
|Maximum Temperature||199°C (390°F)|
|Temperature Control Stability||±0.05°C (±0.1°F)|
|Air Flow Control||0.94±0.047L/min. (2±0.1 Cu. ft./hr) six (6) flowmeters mounted on a common manifold|