Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×

Invalid Captcha
Thank you for your message.
Escomatic - CNC - D2/D5 CNC

The escomatic D2 CNC is the revolutionary and innovative evolution of the fastest automatic turning machine for precise and economic manufacturing of simple parts up to 4.0 mm diameter in large and small lot sizes.

The basis of the escomatic D5 CNC is identical with the one of the escomatic D2 CNC. Machine base, straightening unit, feed system and rotating tool head are absolutely identical with the D2. On the escomatic D5 CNC the counter collet of the D2 has been replaced by a system for the front machining which consists of a cross table with 2 axes supporting 2 drilling spindles, one threading/tapping spindle and one counter collet with programmable positioning.

The CNC control allows for flexible and optimized manufacturing of turned parts without cycle time loss. The advantages of cam driven machines are maintained. The very simple programming system which is based on the experience of operators allows all operators to learn to operate and program the machine within a few hours.

Technical Specification

Coolant/Cutting Fluid Oil
Tank capacity 70 litre
Flow rate of the pump 7 L/min
Max system pressure 4.5 bar
Chips container capacity 15 litre
Installed power 4 kVA
Compressed air consumption 7 m³/H
Compressed air pressure 5 bar
Length x Width x Height 1350 (mm) x 770 (mm) x 1380 (mm)
L x W x H with coil reel 2200 (mm) x 770 (mm) x 1380 (mm)
Net weight 850 kg
Gross Weight 1050 kg

Key Features

  • Proven escomatic technology with menu guided CNC control system
  • Menu guided programming / set-up and quick process adaption
  • Escomatic standard turning tools can be used
  • Tool head speed up to 12’000 RPM
  • Fast cycles and short machining times at enhanced precision
  • Best price / performance ratio for the production of parts with small diameters
  • Improved parts quality, both in meeting tolerances and in surface finish
  • Reduction of labour costs due to fewer machine stops by using material from coil, real 24h operation
  • Economy of floor space due to compact design of the unit „machine & coil stand“
  • Easy and simple set up and operation due to the absence of cams
  • Turning speeds, feed rates and cutting speeds are freely programmable
  • Turning without form tools
  • Aerospace
  • Automotive
  • Machinery & Manufacturing
  • Energy
  • Semiconductor, Solar & Electronics
ESCO SA (ESCOMATIC)For over 60 years, the ESCO company has been dedicated to and specialized in the development and manufacturing of automatic and numerically-controlled lathes used for the production of small diameter parts ranging from 0.30 to 8.00 mm. Unlike conventional lathes, escomatic lathes are based on a unique concept. The material, which is coil stock or bar, does not rotate. The cutting tools are mounted onto the tool head which rotates around the material to produce the components. ESCO SA is represented by Agents or Distributors experienced on Escomatic products in more than 20 countries.
[CNC Lathe machine, best turning machine, watch component turning machine, electronic connector turning machine, electronic component turning machine, turning machine]