Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message

×
Thank you for your message. For any adverse event reporting, please email to hec-ra.sin@dksh.com
Mahr - MaraMeter - Dial Compactor Snap Gages

Technical innovation and quality-oriented thinking are the core competencies of successful businesses.

Both competencies are not possible without metrology.

Measurement instruments verify research and development results and document product quality.
Without continuous advancement of metrology there would be no technical progress.

Mahr offers a wide range of measuring instruments to solve your specific measuring task. Convince yourself!

Available models

DKSH offers Mahr product MaraMeter 840 F
  • Rugged, forged steel frame with heat insulators
  • Measuring spindle is mounted in long guideway with lever controlled retraction
  • Measuring spindle and anvil are made of hardened stainless steel with carbide tipped measuring faces
  • Adjustable centering stop for surface centering
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces
DKSH offers Mahr product MaraMeter 840 F
  • Longer service life due to the ceramic measuring faces
  • Rugged, forged steel frame with heat insulators
  • Measuring spindle is mounted in long guideway with lever controlled retraction
  • Measuring spindle and anvil spindle are both made of hardened stainless steel, ceramic measuring faces
  • Adjustable centering stop for surface centering
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces in connection with ceramic measuring faces
DKSH offers Mahr product MaraMeter 840 F
  • Rugged, forged steel frame with heat insulators
  • Measuring spindle is mounted in long guideway with lever controlled retraction
  • Measuring spindle and anvil spindle have an M 2.5 connection thread, thus enabling the use of interchangeable anvils that are also used in dial indicators and dial comparators
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces
DKSH offers Mahr product MaraMeter 840 F
  • Rugged, forged steel frame with heat insulators
  • Measuring spindle is mounted in long guideway with lever controlled retraction
  • Measuring and anvil spindle have precision tapered bores for mounting interchangeable anvils (with accessory 40 He)
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces
DKSH offers Mahr product MaraMeter 840 F
  • Rugged, forged steel frame with heat insulators
  • Measuring spindle is mounted in long guideway with lever controlled retraction
  • Measuring spindle and anvil spindle made of hardened stainless steel; with extending carbide-tipped measuring jaws
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces in conjunction with carbide-tipped measuring faces
DKSH offers Mahr product MaraMeter 840 FS
  • Rugged, forged steel frame with heat insulators
  • Both spindles are made of hardened stainless steel and mounted in long guideways
  • Carbide tipped measuring faces slightly chamfered at the front to facilitate positioning
  • Projects over width of frame for measurement of narrow registers or when measuring directly at shoulders
  • Adjustable centering stop for surface centering
  • Straight transfer of spindle movement to indicator; ensures the weight of the gage rests on the anvil spindle
  • Direct indication and evaluation of measurement results
  • Constant measuring force as a result of built-in spring, eliminating user influence
DKSH offers Mahr product MaraMeter 840 E
  • Extremely accurate due to the straight transfer of spindle movement to the inductive measuring system according to the Abbe principle
  • Universally applicable and extremely versatile
  • - Each instrument spans a broad measuring range
  • - Any dimension and fit can be very quickly and easily adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces
DKSH offers Mahr product MaraMeter A301P 7
  • Patented “Channel Lock” design assures precise parallel anvil surfaces throughout the full 25 mm / 1“ range of adjustment
  • All Series 300P snap gages are fully adjustable with positive position locking at any point within the rang
  • 0.50 mm / .020“ movement of sensitive contact
  • Snap gages available over a wide range of sizes, styles, and readout configurations
  • Large 15.5 mm / .61“ square tungsten carbide anvils provide flat, parallel, working surfaces that ensure lasting precision that lasts
  • Indicator can be rotated to read from front or rear of the gage
  • All adjustments accomplished using a single hex wrench (furnished)
DKSH offers Mahr product MaraMeter 852
  • Rugged, forged steel frame with heat insulators
  • Measuring spindle is mounted in long guideway with lever controlled retraction
  • Measuring spindle and anvil are made of hardened stainless steel with mounting bore for insertion of interchangeable anvils
  • Adjustable center stop for automatic alignment
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
  • Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces
DKSH offers Mahr product MaraMeter 852 TS and TSZ
  • Rugged steel frame can be inclined up to 45° from the sturdy base
  • Measuring spindle and anvil are made of hardened stainless steel with mounting bore for insertion of interchangeable anvils
  • Height adjustable stop
  • Anvil spindle can easily be fine adjusted
  • Constant measuring force as a result of built-in spring, eliminating user influence
DKSH offers Mahr product MaraMeter 22P-20
  • Indicator built into gage frame for maximum ruggedness
  • Lift lever for one hand operation
  • Continuous reading dials with revolution counter for absolute measurement of thin materials, plastic films and small parts
  • 6.3 mm / .25“ diameter, flat steel contacts
DKSH offers Mahr product MaraMeter 838 A
  • Rugged, sturdy frame made from hard aluminum
  • Built-in digital or dial indicator
  • With a lifting lever for movable upper measuring spindle
  • Convenient heat insulated handle, open at one end
  • Versions with a throat depth of 200 mm have a removable stand
  • Aerospace
  • Automotive
  • Die & Mould
  • Machinery & Manufacturing
  • Railway
  • Semiconductor, Solar & Electronics
  • Shipbuilding
Mahr Inc.Mahr offers a wide range of measuring instruments to solve your specific measuring task. Mahr is an application specialist in the field of production metrology, which solves the metrological tasks and is the contact partner for all questions related to quality. The company offers solutions for high-precision metering to the manufacturers of the synthetic fibres, elastomeres and fiber reinforced composites, their suppliers and generally for the plastics processing industry.
[indicating snap gage, indicating thread gage, portable thickness gage, indicating bench gage]