Seta - Oil Test Centrifuge - 4 place Centrifuge

Back to product overview

Call us +951 8565270

Contact us
Downloads

MYANMAR

Dr. Paing Soe Aung, Assistant General Manager

Phone +951 8565270

Contact Email

DKSH (Myanmar) Ltd.
Thitsar Road, Yankin Township
Yangon
Myanmar

Oil Test Centrifuge factsheet - Protected
(PDF, 399 KB)

Seta - Oil Test Centrifuge - 4 place Centrifuge

This purpose-made Oil Test Centrifuge is fully programmable allowing automatic configuration to the specified oil test parameters. A four place swing out rotor and universal bucket assembly accommodates low cost adaptors and cushions suitable for borosilicate glass centrifuge tubes of the types specified for oil testing: 6 or 8 inch conical, 8 inch trace sediment, 8 inch pear-shaped or 12.5ml. To reduce errors in measurement of tube content, the rotor design allows tubes to stand in a near upright (vertical) position at rest.

Technical specifications

Maximum Relative Centrifugal Force (RCF)	2214g
Maximum Rotational Speed	3000 rev/min
Temperature Range	30 to 80°C ±1°C at 60°C
Timer Range	10 seconds to 59 minutes 50 seconds (10 second steps) up to 1 hour run time. After 1 hour run time the centrifuge run time is 1 hour to 99 hours 59 minutes (only 1 minute steps are possible). Continuous running until manually stopped
Control	Microprocessor with 99 memory capacity
Capacity	4 Samples
Voltage range	220/240V, 50/60Hz (Optional transformer for 110/120V)
Power	950W
Dimensions (H x W x D) / Weight	40.1 x 56.41 x 63.93cm 72.5kg

Key features

Oil Test Centrifuge

Conforms to safety requirements IEC 1010-1; 1010-2-D
4 place swing out rotor
Static, near vertical bucket positioning
Specifically designed for testing oils
Heated chamber, ambient to 80°C
Membrane ‘touch’ control panel
Pre-heat facility to ensure bowl is at test temperature prior to test
Universal buckets for 12.5ml, 6 and 8 inch glassware
Optional ‘Setafuge’ Hazard Reduction System
Microprocessor control with 99 memories
Optional trolley

Key Industries

Environmental
Oil & Gas
Pharmaceutical

Stanhope-Seta design and manufacture quality control instruments used to measure the physical characteristics that determine product quality and consistency. The 'Seta' range includes test equipment for the hydrocarbons industry as well as many other laboratory test applications for quality control, calibration and analysis.