Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Need support?

Please leave a message


Invalid Captcha
Thank you for your message. A representative will get in touch with you shortly.
Claind - Hydrogen Generator - HyGen

  • Designed for Carrier Gas in GC, GC-MSD and “FAST GC”
  • UHP Purity that meets the needs required by the track analysis
  • Security system with audible alarms, display messages and automatic production stop in case of gas leaks
  • Available the automatic Switch with inert gas when Hydrogen alarm
  • Parallel connection from series up to 4 stacked generators

    Technical Specifications

    Flow Rate 200/400/600 Nml/min ± 10% a 2000 m slm (possibility to connect in parallel up to 4 stacked generators)
    Technologies Employ HT PEM electrolytic cell
    Output Pressure 2 - 8 bar ± 3% /30 - 116 psi ± 3%
    Purity 99,9999 %
    Oxygen < 1 ppm
    Moisture Better than -70℃ dew-point ATP at 20℃
    Requirements of Demineralized Water Required resistivity >1 MΩ cm @25°C; ASTM Type II
    Advised resistivity >10 MΩ cm @25°C; ASTM Type I
    Electrical Supply 115/230 VAC (+/- 10%) 50-60 Hz
    HyGen 200: 110W
    HyGen 400: 180W
    HyGen 600: 250W
    Index Of Protection IP20
    Noise < 50 dBA
    Operating Temperature 5℃ - 35℃ / 40°F - 95°F
    Environmental Humidity max 90% without condensation
    Max Altitude 2000 m slm
    Dimensions Height: 40 cm + 7 cm (base) /15.8” + 2.8”
    Width: 38 cm/14.9”
    Width: 38 cm/14.9”
    Weight 30 kg/67 lbs
    Pneumatic Connections Hydrogen output : G 1/8” female AISI 316
    Exhaust: quick coupling for plastic pipe 4 mm
    Input demineralized water: flexible hose with 1⁄4” connection
    Warranty 2 years

    Key Features

    • Modular configuration
    • Equipped with the innovative HT PEM cell for high purity
    • Removable water tank for easy cleaning and water change; automatic water loading pump included for external water supply
    • Maintenance: simple substitution of the deionizing bag and drier, only after 50.000l of H2 produced
    • CPU with Touch Screen Display connectable with CAN BUS to the generators (up to 32 units), allows the operational status monitor, showing menus with report alarms and functioning parameters
    • Hydrogen production proportional to consumption, with the minimum gas storage within the instrument
    • CPU equipped with LAN connection 
    • Aerospace
    • Agriculture
    • Automotive
    • Biopharmaceutical and Biotechnology
    • Chemical
    • Construction
    • Cosmetics & Personal Care
    • Defense
    • Die & Mould
    • Education & Academics
    • Electronics
    • Energy
    • Environmental
    • Food & Beverage
    • Luxury
    • Machinery & Manufacturing
    • Medical
    • Mining & Minerals
    • Oil & Gas
    • Optical
    • Paper & Wood
    • Pharmaceutical
    • Polymers, Plastics and Rubbers
    • Powders & Pigments / Coating
    • Railway
    • Semiconductor, Solar & Electronics
    • Service
    • Shipbuilding
    • Textile
    • Wholesale & Retail

    Established in 1979, Claind produces hydrogen, nitrogen and zero air generators. Its headquarters is in Lenno, on the shores of Lake Como, where all product development, production and administration activities are carried out. The customers who Claind targets can be broken down into three main categories: analysis laboratories, food and beverage companies and laser cutting companies.

    Over the years Claind's staff has received and paid back the confidence of more than 3,000 customers with over 20,000 installations worldwide.

    The principle that guides every business decision is the desire to achieve customer satisfaction, in this way strengthening a relationship based on trust that goes far beyond mere contacts for technical and commercial aspects.

    [Hy Gen 200, Hy Gen 400, Hy Gen 600, Hygen, claind, Hydrogen generator]