Request a quote

Please leave a message

×

Invalid Captcha
Thank you for your message.

Warewashing - Hood Type Dishwasher

Available models

Technical specifications
Power cord
2,500 mm
Hoses for detergent and rinse agent
2,000 mm each
Water consumption
2.5 l / rack
Tank capacity
21 l
Tank heating
2.5 kW interlocked
Power supply
400 / 50 / 3 / N
Booster loading
12.6 kW
Total loading
7 kW / 3 x 16 A
Pump capacity
0.7 kW / 350 l/min
Loading height
440 mm
Noise level
67 dB(A)
Weight gross / net
121 / 101 kg

Key features

  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump
  • Electronic Control SMARTRONIC: with status indication
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood - a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Rinse Pump ACCURINSE: guarantees a constant 2,5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber

Technical specifications
Power cord
2,500 mm
Hoses for detergent and rinse agent
2,000 mm each
Water consumption
2,5 l / rack
Tank capacity
22 l
Tank heating
3 kW interlocked
Power supply
380-415V/ 50H / 3 / N
Booster loading
Water inlet 10°C ¹
12.6 kW
Water inlet 60°C²
6.3kW
Total loading
16 kW¹ | 9.7KW²
Pump capacity
0,73 kW
Loading height
440 mm
Noise level
67 dB(A)
Net weight of machine
120 kg

Key features

  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump
  • Electronic Control SMARTRONIC: with status indication
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood - a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Rinse Pump ACCURINSE: guarantees a constant 2,5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
Technical specifications
Flexible drain hose 2,000 mm
20mm inner / 25mm outer diam.
Power cord
2,500 mm
Hoses for detergent and rinse agent
2,000 mm each
Water consumption
2.5 l / rack
Tank capacity
21 l
Tank heating
2.5 kW interlocked
Power supply
400 / 50 / 3 / N
Booster loading
6.15 kW
Total loading
7 kW / 3 x 16 A
Pump capacity
0.7 kW / 350 l/min
Loading height
440 mm
Noise level
67 dB(A)
Weight gross / net
121 / 101 kg

Key features

  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump, drain pump and chemical dispenser
  • Fine Filter System GENIUS-X2: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
  • Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood ย– a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Insulated hood reduces noise and heat loss by up to 50% (optional)
  • Rinse System ACCURINSE: guarantees a constant 2.5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
  • Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 6.5 kW
  • Hood System VAPOSTOP (optional): prevents vapour from escaping from the machine when the door is opened (only for AMX(R)-16 and AMX(R)S-16)
Technical specifications
Flexible drain hose 2,000 mm
20mm inner / 25mm outer diam.
Power cord
2,500 mm
Hoses for detergent and rinse agent
2,000 mm each
Water consumption
5 l / cycle
Tank capacity
42 l
Tank heating
2 x 2.5 kW
Power supply
400 / 50 / 3 / N
Booster loading
12.3 (6.15) kW
Total loading
18.8 kW / 3 x 35 A
Pump capacity
2 x 0.7 kW / 350 l/min
Loading height
440 mm
Noise level
68 dB (A)
Weight gross / net
212 / 180 kg

Key features

  • Double wide wash chamber can cover even bigger containers, etc.
  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump, drain pump and chemical dispenser
  • Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
  • Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time 
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood ย– a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Insulated hood reduces noise and heat loss up to 50%
  • Rinse System ACCURINSE: guarantees a constant 5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
  • Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 13 kW
Technical specifications
Flexible drain hose 2,000 mm
20mm inner / 25mm outer diam.
Power cord
2,500 mm
Hoses for detergent and rinse agent
2,000 mm each
Water consumption
1.6 l / rack
Tank capacity
40 l
Tank heating
2.5 kW
Power supply
400 / 50 / 3 / N
Booster loading
12.3 (6.15) kW
Total loading
17.1 kW / 3 x 35 A
Pump capacity
2 x 1.1 kW
Loading height
440 mm
Noise level
70 dB (A)
Weight gross / net
148 / 128 kg

Key features

  • Vapo Rinse ECO: switchable steam rinse cycle reduces fresh-water consumption to 1.6 l/cycle
  • Washing HOT-TEMP: higher temperature of 63°C increases the capacity up to 75 racks/h
  • Cutlery cycle: removes even persistent residues by the use of steam 
  • Insulated hood reduces noise and heat loss up to 50%
  • Cleaning Cycle STARCH REMOVAL removes the starch from the crockery
  • Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
  • Wash programme POWER-PLUS: selectable higher pressure programme to wash heavily soiled wash items
  • Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
  • Ready to install: incl. fill and drain hoses, power cord, non-return valve
  • Completely equipped with rinse pressure pump, drain pump and chemical dispenser
  • Single-button Control SMARTRONIC: with colour-coded status indication of remaining cycle time
  • Hood Design EASY-LIFT: 50% less effort is needed to open the hood ย– a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
  • Rinse Pump ACCURINSE: guarantees a constant 1.6/2.3 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals
  • Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
  • Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 6.5 kW
Technical specifications
Flexible drain hose 2,000 mm
20mm inner / 25mm outer diam.
Power cord
2,500 mm
water consumption
2,5 l
tank capacity
21 l
tank heating
2,5 kW interlocked
Voltages + Total loading
440/60/3/PE - 10,2 kW | 230/60/3/PE - 9,2 kW | 400/50/3/PE - 9,2 kW
pump capacity
0,7 kW / 370 l/min
noise level
67 dB(A) | 65 dB(A) insul.
weight net
appr. 105 kg

Key features

  • Built acc. USPHS/NSF regulations
  • Ready to install: incl. fill and drain hoses, power cord, class "A"airgap
  • Completely equipped with rinse pressure pump and drain pump
  • Fine Filter System GENIUS-X2: advanced filter system with prewash function, reduces detergent consumption by up to 30 %.
  • Electronic Control SMARTRONIC: with color-coded status indication
  • Hood Design EASY-LIFT: 50 % less effort is needed to open the hood ย– a real benefit for the operator
  • Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW. Less humidity in the kitchen area and better hygienic conditions
  • Insulated hood reduces noise and heat loss up to 50 %
  • Rinse Pump ACCURINSE: guarantees a constant 2.5l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
  •     Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
  • Water Softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
  • Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6,5 kW
  • Stainless steel back panel
  • Marine stainless steel feet
  • Different marine voltages available
Hobart

HOBART manufactures products for the food service and food retail industry, including cooking, food preparation, warewashers and waste handling, weight wrap, Baxter baking and Traulsen refrigeration.

HOBART Thailand and Indochina office has been established with Warehouse and the Spare Parts Center in objectives to support distribution network throughout the region of Thailand and CLMV Countries which consist of Cambodia, Laos, Myanmar and Vietnam upon economic expansion and commit in quality genuine profession as stated ย“HOBART proudly supporter youย” always.

[]