Document Basket

Saved pages

Saved documents

Please note: This information is saved in a cookie. In case your browser deletes cookies after a session, the information will be lost.

Request a quote

Please leave a message

×

Invalid Captcha
Thank you for your message.

It's a motorized pull force test devices for forces from 100 N (22.5 lbf) up to 10,000 N (2,250 lbf). Capabilities such as multiple force ranges and pulling rates, job memory and networking capabilities vary between models. Wire and terminal holders can be configured or customized to suit specific application

Available models

Schleuniger - PullTester 20

The PullTester 20 is an economical motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections.

  • Speed controlled motor for consistent pull rates
  • Simple LCD display for easy programming & reading
  • Repeatable & accurate data
  • Versatile terminal (crimp) holder
  • RS 232 interface for curve analysis & statistics with optional WinCrimp PC software

Application Range

Schleuniger’s PullTester 20 is a motorized, benchtop unit designed to measure pull-test forces for a variety of applications. The most common applications are wire crimp and ultrasonic metal welding connections, but the design makes it possible to create custom fixtures for many other applications. Standards, such as IEC and SAE, specify that the device pulls at a consistent rate.

The Schleuniger PullTester 20 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range, which means repeatable and accurate data. Pull-to-break (destructive) tests can be measured in poundforce, Newtons or kiloponds.

Schleuniger - PullTester 25

The PullTester 25 is a dual-range, motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections on a broader range of wires than single-range pull test devices.

  • Speed-controlled motor for consistent pull rates
  • Simple LCD display for easy programming & reading
  • Repeatable & accurate data
  • Versatile terminal (crimp) holder
  • RS 232 interface for curve analysis & statistics with optional WinCrimp PC software

Application Range

Schleuniger’s PullTester 25 is a dual-range, motorized, bench-top unit designed to measure pull-test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance.

This versatile machine has two measuring ranges, which are individually calibrated enabling use of its 500 N (110 lbf.) scale for small wires, while easily switching to its 1,000 N (220 lbf.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate.

The Schleuniger PullTester 25 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.

Schleuniger - PullTester26

Schleuniger's PullTester 26 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 26 is specially suited for quality assurance in a production environment.

  • Speed-controlled motor provides extremely consistent readings
  • 4 pulling modes for destructive & non-destructive tests
  • 2 separate displays for easy reading & programming
  • Standard RS 232 interface for curve analysis and downloading test data
  • Networking capability

Application Range

Schleuniger’s PullTester 26 is a dual-range, motorized, bench-top unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 26 can also perform non-destructive tests (hold to a specified force).

This versatile machine has two measuring ranges, which are individually calibrated, enabling use of its 500 N (110 lbf.) scale for small wires, while easily switching to its 1,000 N (220 lbf.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 26 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data.

Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.

Schleuniger - PullTester 27

Schleuniger’s PullTester 27 là thiết bị kiểm tra lực kéo để bàn, có động cơ, được thiết kế để đo lực kéo thử của các mối nối dập trên một phạm vi rộng hơn so với các thiết bị thử kéo đơn. Giá trị kiểm tra lực kéo là các thông số quan trọng để kiểm soát và đảm bảo chất lượng. Máy đa năng này có hai phiên bản với hai phạm vi đo, mỗi phạm vi được hiệu chỉnh riêng, cho phép sử dụng cho cáp nhỏ hoặc lớn.

  • Động cơ điều khiển tốc độ cho tốc độ kéo phù hợp
  • Màn hình LCD đơn giản để dễ dàng lập trình & đọc
  • Dữ liệu lặp lại và chính xác
  • Giá đỡ điểm cuối đa năng (dập)
  • Giao diện RS 232 để phân tích và thống kê đường cong với phần mềm PC WinCaleigh tùy chọn
  • PullTester 27 (tiêu chuẩn): 2,000 / 5,000 N (440 / 1,100 lbf.)
  • PullTester 27-10 (đặc biệt): 5,000 / 10,000 N (1,100 / 2,200 lbf.)

Tính năng dual-range đảm bảo độ chính xác cao nhất cho phạm vi ứng dụng rộng nhất. Các thiết bị kiểm tra lực kéo được điều khiển bằng tay hoặc bằng khí nén có thể cung cấp dữ liệu không nhất quán tùy thuộc vào người vận hành hoặc tốc độ kéo. Một số tiêu chuẩn yêu cầu thiết bị thử nghiệm phải được kéo với tỷ lệ phù hợp. Schleuniger PullTester 27 được trang bị động cơ điều khiển tốc độ, đảm bảo tốc độ kéo ổn định trong toàn phạm vi đo giúp dữ liệu lặp lại và chính xác. Lực kéo có thể được đo bằng các đơn vị poundforce, Newton hoặc kiloponds. Giá đỡ thiết bị đầu cốt có thể được thiết kế và sản xuất dựa trên ứng dụng. Ngoài ra, nhiều giá đỡ đầu cốt có sẵn theo yêu cầu.

Schleuniger - PullTester 28

Schleuniger's PullTester 28 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 28 is specially suited for quality assurance in a production environment.

  • Speed-controlled motor provides extremely consistent readings
  • 3 pulling modes for destructive & non-destructive tests
  • Simple LCD display for easy programming and read out
  • Standard RS 232 interface for curve analysis and downloading test data
  • Networking capabilities

Application Range

Schleuniger’s PullTester 28 is a dual-range, motorized, bench-top unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 28 can also perform non-destructive tests (hold to a specified force). This versatile machine has two versions with two measuring ranges each, which are individually calibrated, enabling use for small or large cables.

  • PullTester 28 (standard): 2,000 / 5,000 N (440 / 1,100 lbf.)
  • PullTester 28-10 (special): 5,000 / 10,000 N (1,100 / 2,200 lbf.)

This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 28 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The terminal holder can be designed and manufactured based on your application. In addition, a variety of terminal holders are available upon request.

Schleuniger - PullTester 320

Overview

Schleuniger’s PullTester 320 is a motorized device for use with Schleuniger CrimpCenter automatic crimping machines to measure pull test forces of wire terminations. Pull test values are critical parameters for quality control and assurance. This versatile machine has three measuring ranges, which are individually calibrated. Multiple pulling ranges offer a higher accuracy over the entire device range than single-range devices. The standard measuring ranges are 100 N, 200 N and 1,000 N (22.5 lbf., 45 lbf., and 220 lbf.). The PullTester 320 with its triple-range capability ensures the highest accuracy over the widest range of applications.

Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a specific, constant rate. The Schleuniger PullTester 320 offers four selectable pulling rates consistent with the most common specifications. It is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the complete measurement cycle resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. All necessary testing parameters are programmed via the CrimpCenter EASY software and saved with individual jobs for easy recall.

 

Application Range

The standard, 12-position terminal holder accommodates a wide variety of terminals to handle most applications. The machine will test pull forces up to 1,000 N (220 lbf.) and is specially suited for quality assurance in a production environment.

  •  Triple range for the best accuracy over the widest range of wires
  • 4 selectable pulling rates to comply with common test requirements
  •  Speed-controlled motor for consistent pull rates throughout the measuring range
  •  Fully integrated into CrimpCenter EASY software to save time

Overview

The PullTester 325 is a triple-range, motorized benchtop device for measuring pull forces of crimp connections, welded connections or many other possibilities. The triple-range capability gives the PullTester 325 incredible application flexibility to handle a wide variety of testing applications. Furthermore, this unique capability provides greater accuracy on a broader range of wires than single-range pull test devices. The PullTester 325 is specially suited for quality assurance in a production environment.

  • 3 selectable force ranges for improved accuracy over a wider range of wires
  • 2 selectable pulling rates
  • Speed-controlled motor for consistent pull rates
  • Simple LCD display for easy programming & reading
  • Repeatable & accurate data
  • Variety of possible terminal (crimp) and wire holders
  • Standard RS 232 interface for curve analysis with optional WinCrimp PC software

This versatile machine has two versions depending on required pull rates. Both versions include three measuring ranges, which are individually calibrated. The standard measuring ranges are 200 N, 1,000 N and 2,000 N (45 lbf., 225 lbf., 450 lbf.), however, other variations are available by special order. 

  • PullTester 325-25: 200 / 1,000 / 2,000 N (45 / 225 / 450 lbf.) @ 25 / 50 mm/min (0.98 or 1.97“/min)
  • PullTester 325-50: 200 / 1,000 / 2,000 N (45 / 225 / 450 lbf.)  @ 50 / 100 mm/min (1.97 / 3.94”/min)

Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 325 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 14-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.

Schleuniger - PullTester 326

Overview

The PullTester 326 is a triple-range, motorized benchtop device for measuring pull forces of crimp connections as well as welded connections. The triple-range capability gives the PullTester 326 incredible application flexibility to handle a wide variety of testing applications.

  • Simple LCD display for easy programming and digital pull force read out
  • Speed-controlled motor for consistent pull rates throughout the measuring range
  • 3 selectable force ranges for improved accuracy over a wider range of wires
  • 4 selectable test modes for destructive and non-destructive testing
  • Job memory for loading test parameters and extracting test results for statistical analysis
  • RS 232 interface for curve analysis with WinCrimp statistical software

Application Range

Schleuniger’s PullTester 326 is a triple-range, motorized, benchtop unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 326 can also perform non-destructive tests (hold to a specified force). This versatile machine has three measuring ranges, which are individually calibrated. The standard measuring ranges are 200 N, 1,000 N, and 2,000 N (45 lbf., 225 lbf., 450 lbf.), however, other variations are available by special order. This triple-range capability ensures the highest accuracy for the widest range of applications.

Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 326 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range, resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 14-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.

 

  • Aerospace
  • Automotive
  • Die & Mould
  • Defense
  • Education & Academics
  • Machinery & Manufacturing
  • Semiconductor, Solar & Electronics
  • Shipbuilding
SchleunigerSchleuniger is a global technology group headquartered in Thun (CH) and a leading supplier to the wire processing and testing industry. All wire processing and automation competencies are bundled under the brand name Schleuniger Group in four centers of competence in Europe and one operations hub in Asia. The Schleuniger Group’s wire testing competencies are covered by adaptronic Prüftechnik GmbH headquartered in Wertheim (DE). With its wholly-owned but independently managed company, DiIT AG, headquartered in Krailling near Munich (DE), the Schleuniger Group is also a leading player in the area of digitalization and industrial Internet of Things (IoT).
[]