PEEK Y Connectors are designed to split a stream or join two streams together, just like a tee. However, the configuration of a tee can lead to turbulent flow and solvent outgassing, which increases baseline noise and reduces sensitivity. The geometry of a Y connector creates less turbulence and thus can improve analytical results. All of these Y Connectors use 1/4-28 Flangeless fittings, except P-515 which uses 5/16-24 fittings (to accommodate larger tubing).
Our PEEK Y Connector Assembly can split a stream or join two streams together similar to a "T" design. Unlike a "T" the geometry of the "Y" design reduces turbulence and improves analytical results.
List of available PEEK Y Connectors
|Material||Thread Port Configuration||Swept Volume||Thru hole||Pressure Rating Max||For tubing outer diameter|
|PEEK||1/4-28 Flat-Bottom||1.7 µL||0.020 inches/0.50 mm||1000 psi/69 bar||1/16 inches|
|PEEK||1/4-28 Flat-Bottom||6 µL||0.040 inches/1 mm||500 psi/34 bar||1/8 inches|
|PEEK||1/4-28 Flat-Bottom||13.6 µL||0.060 inches/1.50 mm||500 psi/34 bar||1/8 inches|
|PEEK||1/4-28 Flat-Bottom||47.7 µL||0.125 inches/3.20 mm||500 psi/34 bar||3/16 inches|