The automated Abel flash point tester is used primarily to test flammable and combustible materials for shipping and safety regulations. The flash tester provides an increased temperature range of operation as compared with other testers, allowing greater flexibility in testing samples according to the Abel test method. The unit provides a test range to 110°C and can be extended to –30°C by any appropriate external chiller. The flash point tests are simply conducted by mounting the flash cup filled with sample into the test position and selecting a pre- or user-programmed test method. Automation routines provide accurate test results. A quick search method is available to determine the flash point of unknown samples. The dual detection system (thermal and ionization) allows for testing all types of products. Ignition by gas flame or electrical ignitor is included, along with safety cut-off devices. Test results are automatically corrected to standard pressure (101.3 kPa). The system is equipped with a differential Pt-100 RTD probe designed to duplicate the response time of a mercury-in-glass thermometer and with multiple sensors that continually monitor instrument function, displaying an error message if a problem is detected. Supervision software is included.
Compliance
|
IP 170; ISO 13016; NF T 66-009; DIN 51755
|
---|---|
Temperature Range
|
Ambient to 110°C; Subambient to -40°C with external cooling
|
Power Requirements
|
230V 50/60Hz
|
Dimensions (cm)
|
26 x 5.53 x 50
|
Net weight
|
27.2 kg
|
Compliance
|
IP 170, ISO 13736
|
---|---|
Temperature Range
|
-30°C and 70°C
|
Power Requirements
|
220-240V 50/60Hz
|
Dimensions (cm)
|
25.4 x 44.5 x 29.2
|
Net weight
|
11.34 kg
|
The Abel Closed cup flash point tester is used primarily to test flammable and combustible materials for shipping and safety regulations. Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater. Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals. Hinged thermometer support raises to facilitate placement and removal of test cup. Adjust flame size using built-in needle valve and comparison bead. Equipped with a 400W nickel-chromium heater with stepless variable heat control for accurate repeat setting of temperature rate of rise per specifications