Han’s Laser – 3D-5 Axis Laser Cutting Machine

Precision Technology:

Model W4525D、W4020D，High cutting accuracy, fast cutting speed, small heat affected zone, good surface finish, moving speed up to 100m/min.

Flexible Processing:

Three-dimensional processing head can achieve infinite rotation of n × 360 °, ± 135 ° swing, from cutting to welding, rapid replacement of the processing head, without adjustment, a dual-purpose machine.

Advanced Technology:

The fiber laser has a high energy conversion rate, which is 60% lower than that of the same power CO2 laser and is free from optical path maintenance. The laser consumes no gas, and the equipment operation cost is low.

High Efficiency:

The machine tool adopts a hanging arm to work along with the beam, to create a better connection with the cutting parts, and makes it easier for maintenance. It is equipped with a double position rotating work table to realize one side loading and unloading while the other side is in the cutting process, so as to improve production efficiency.

Leading Technique:

The key parts of the equipment are analyzed by CAE dynamics, with good dynamic rigidity and strong bearing capacity; cutting head N*360° infinite rotation, and ±135°swing, with a maximum speed of 173m/min, acceleration of 1.0G, and instant piercing function, to greatly improved production efficiency.

3D Cutting:

The equipment adopts fiber laser resonator, can realize the precision cutting requirement of 3-dimensional curve surface thick sheet metal. The energy conversion of fiber laser resonator is high, and the power consumption is 60% lower compared to that of the CO2 laser with the same power. Free of optical maintenance, the resonator also does not need gas consumption. Thus, the running cost of the equipment is low.

Precision Technique:

Models W3122T, W3525T, and W4525T are with high cutting accuracy, fast cutting speed, small heat affected zone, and smooth surface, moving speed up to 30m/min.

Flexible Processing:

3D processing head can realize N*360°infinite rotation, ±135°swing, from cutting to welding, an instant switch of processing head, free of adjustment to realize one machine two functions.

Advanced Performance:

The fiber laser is with a narrower wavelength to create more intense energy, more suitable for cutting aluminum parts on the automobile. 60% lower energy consumption than that of CO2 laser with the same power, free of optical maintenance, no gas consumption, so as to have a lower cost of operation.