Sanding Deburring Machine

• Associated function: brushing, deburring, sanding
• Applications: for sheet metal, metal parts

Transversal sanding machine for metal surface deburring and rounding of edges, with 6 upper and lower working groups for simultaneous processing on both sides. Fixed bench with motorized dragging rollers in reinforced steel at variable speed. Independent motors for each work group for greater control of processing and management of different working pressures. Equipped with two abrasive belt units and 4 tracks with translating abrasive strips. Touch screen control panel with storage of work programs and alarm self-diagnosis.

Machine elements

ransversal abrasive belt unit with pressure pad to facilitate the entry of the pieces with independent motor with automatic braking. Tensioning system Group with double belts with strips brushes for perfect brushing on all edges of the sheet even inside the holes. The maintenance of previous surface treatments is guaranteed. Motorized and independent pressure regulation from 0 to 35 mm.

Sanding Deburring Machine

• Associated function: finishing, sanding, edge sanding machine
• Applications: for sheet metal, metal parts

Double abrasive belt grinding machine with high working capacity, with belt speed control from 0 to 3000 rev / min. Pneumatic tension system and various accessories for the workpiece machining according to the need, rubber roller, shoe, brush. Special configuration of guide rollers and idle rollers that allow the operator to move the accessory to any point on the belt. Motorized workpiece support table.
Vacuum handling system available with suction cups to block the most difficult pieces to work in any position, with 360 ° horizontal shaft rotation, 360 ° vertical axis rotation and 90 ° horizontal inclination.

Machine elements

Transversal abrasive belt unit with pneumatic tensioning system, high flexibility to adapt to all conditions of the piece.

Belt deburring machine / automatic

• Associated function: finishing, deburring, sanding
• Applications: for sheet metal, for steel parts, aluminum parts, for sawing burrs

Belt sanding machine for metal surfaces with a useful working width of up to 300 mm with a single and mobile feed bench with ascent and descent thanks to the handwheel, with double feed speed up to 10 m / min. Configurable up to 3 work groups independently controllable from the control panel.

Finishing deburring machine / brush / belt / automatic

• Associated function: edge rounding, grinding, polishing

Mobile bench abrasive belt sander that supports up to 3 internal work groups for a configuration adaptable to the need for finishing. Motorized lifting work table with the possibility of inserting a vacuum system. Fine control piece thickness adjustment +/- 0.1. Alarm diagnostic unit with immediate display of emergencies and faults. Variable feed speed with automatic centering belt. Electronic control of inlet thickness. Dust extraction hoods for each work group

Wet version available for processing materials tending to deformation with heat, equipped with tank with motorized pump for water filtration.

Machine elements

Abrasive belt unit with 125 mm diameter contact roller with heat-resistant nitrile rubber with helical groove and standard hardness 55 ° shore. 7.5 kW 1-speed motor with automatic braking. Automatic belt centering system with electronic photocell. Pneumatic belt tensioning system

Group composed of 8 top quick-change brushes rotating clockwise and counterclockwise simultaneously with transversal movement of the whole group. Motorized and automatic group positioning system according to the program. Brush diameter 115 mm.

Group with scotch brite brush diameter 200 mm, manual ascent and descent system with mechanical height indicator, 1 speed motor 3.0 kW and transversal oscillation system. Rotation in both directions possible.

Edge rounding deburring machine / finishing / belt / for sheet metal

• Associated function: finishing, deburring, sanding
• Applications: for sheet metal, metal parts

Deburring machine with single abrasive belt working group with mobile bench with adjustment lever with fine control +/- 0.1 and digital thickness display. Advance group with self-centering rubber belt with rubberised pressure rollers before and after the work group and idle roller at the input and output.

Machine elements

Abrasive belt unit with contact roller 150 mm diameter with heat-resistant nitrile rubber with helical groove and standard hardness 55 ° shore. 1 speed motor kW 11 with automatic braking. Automatic belt centering system with electronic photocell. Pneumatic belt tensioning system.