Need support?

Please leave a message

×

When designing our slitter rewinders, we added various features that allow slitting of difficult materials such as diaper membrane, thin filtration non woven or rigging PET up to 700 microns. Our slitter offer different levels of automation as well as customization, for example laser perforation.

Available models

Soma Slitter Rewinders Pluto III
Web width
1100/1350/1600 mm
Speed
600 m/min
Max. rewind diameter
635 mm
Min slit width
35/25 mm option
Unwind roll diameter
1000 mm
Unwind roll weight
1200 kg
Processed substrates
paper, PP, PET, LDPE, HDPE, Film laminate

The PLUTO III Slitter Rewinder with integrated unwind unit offers to converters a cost effective solution for slitting of a wide range of substrates.

  • Slitting and rewinding of diaper LDPE
  • Diapher membrane slitting with pneumatic knives
  • Slitting and rewiding on 40 mm (1.6") cores
  • Diaper membrane slitting with rotary knives
  • Pneumatic holder for thin plastic film slitting
  • Laser perforation
Soma Slitter Rewinders Venus III
Web width
1350/1600/1850 mm
Speed
800 m/min
Max. rewind diameter
820 mm
Min slit width
35/25 mm option
Unwind roll diameter
1300/1500 mm
Unwind roll weight
1500/2000 kg
Processed substrates
paper, PP, PET, LDPE, HDPE, Film laminate

VENUS III is top of the range, high performance slitter, that offers converters maximum efficiency in slitting.

  • Slitting and rewinding of diaper LDPE
  • Diapher membrane slitting with pneumatic knives
  • Slitting and rewiding on 40 mm (1.6") cores
  • Diaper membrane slitting with rotary knives
  • Pneumatic holder for thin plastic film slitting
  • Laser perforation

 

Soma Slitter Rewinders Venus III-T
Web width
1350/1600/1850 mm
Speed
800 m/min
Max. rewind diameter
820 mm
Min slit width
35/25 mm option
Unwind roll diameter
1300/1500 mm
Unwind roll weight
1500/2000 kg
Processed substrates
paper, PP, PET, LDPE, HDPE, Film laminate

The VENUS III Turret is aimed at larger converting companies needing multiple slitting of medium diameter rolls with the highest level of automation and productivity.

  • Slitting and rewinding of diaper LDPE
  • Diapher membrane slitting with pneumatic knives
  • Slitting and rewiding on 40 mm (1.6") cores
  • Diaper membrane slitting with rotary knives
  • Pneumatic holder for thin plastic film slitting
  • Laser perforation

Key features

  • Automatic knife/blade positioning
    ensures quick and precise knife setting
  • Automatic laser core guiding
    enables precise and very quick core setting for new jobs. The system uses data from the automatic knife positioning system
  • Shaft-less unwinding
    Shaft-less hydraulic tilting arms ensure easy parent roll handling
  • Splicing table
    A vacuum splicing table with two pneumatic holders and back-light desk enables easy and precise web splicing

  • Unloading mechanism
    delivers the finished slit rolls to a rotary stand. The stand rotates in a horizontal or vertical direction.

  • Recipe system
    different working parameters are stored in the memory such as speed, tension, lay-on pressure, knife / blade setting and laser core guiding position information

  • Automatic cross slitting
    cuts the web of the slit rolls during job changeover.

  • Strip holders automatically hold the web in place and maintain the tension in slit strips during job changeover.

  • Slitting techniques 
    A variable knife shaft permits tangential slitting with lower and upper rotary knives or with razor blades against grooved segment. For more difficult thin substrates it is possible to choose wrap around female knife slitting with rotary knives or with razor blades. It is also possible to combine rotary knives slitting and edge trimming via special additional razor blades.
  • Sophisticated tension control 
    The Tenzomat II tension control system enables precise unwind and rewind tension control during the whole operating cycle in a closed loop and therefore slit very thin and difficult substrates.
  • Servo drives 
    The system includes 4 servo motors. First motor drives main drive roller, lay-on rollers, knife shafts and banana roller. An unwind AC servo motor in combination with a dance roller control tension of parent roll. The third and the fourth AC servomotor drives both rewind shafts on every single carousel.
  • Banana roller 
    An adjustable angle, driven banana roller with hard grooved segments is positioned before the lower knife shaft.
  • Eccentric roller An adjustable angle eccentric roller ensures web laying on the lower knife shaft during slitting of wrinkled material.
  • Angle adjustable roller 
    An adjustable guiding roller laterally balances the web and contributes to higher quality output during slitting from conical or low quality parent rolls.
  • Lay-on rollers 
    Lay-on rubber rollers on tilting arms are fixed on a rod with spring-loaded segments ensuring perfect contact between lay-on roller and finished reel.
  • Minimum gap winding 
    This rewinding technique is used to eliminate pressure of the lay-on rollers to the slit rolls. This type of rewinding is usually used for processing materials such as pressure sensitive, self adhesive, cold seal and special structures.
  • Torgue rewidning 
    Torque rewinding with pneumatic expanding shafts is an alternative solution to friction ring rewinding and may be used for very narrow slit rolls of paper, when higher tension is need and so on.
  • Overhead web path 
    design suitable for pharmaceutical and food packaging where stringent hygiene and clean room standards are in force.
  • Intuitive control 
    Several panels help to operate the machine: 2 touch screen panels for rewinding and slitting, one panel in unwind section with portable control panel for parent roll loading.
  • CE standards 
    Machines comply with and meet stringent European safety standards and codes.
  • Turreting support system 
    The unique design of the rotary support arms for each rewinding shaft during change-over permits heavy reels to be handled without the risk of overloading the rewind shafts.
  • Safety features 
    Machines are designed with maximum emphasis on operator safety. All rotating elements in the slitting section are secured by safety covers and are inaccessible to the operator during the operating cycle. The rewind area is secured by a laser scanner.

Discover Venus III-T

[]