Need support?

Please leave a message

×

XSYS - rotec® Sleeves

INDONESIA

Maggie Yang, Managing Director, Technology

+62 21 2988 8557
Fax +62 22 2988 7870
Contact Email
PT. DKSH Indonesia
AIA Central 39th floor. Jalan Jenderal Sudirman Kavling 48A
12930 Jakarta Selatan
Indonesia

THAILAND

Nantachat Pirakarnchinapak, Sales and Business Development Manager

+66 2 639 7000
Contact Email
DKSH Technology
2106 (Fantree4) Sukhumvit Road, Bangchak, Phrakhanong
10260 Bangkok
Thailand
  • rotec brochure - Protected
    (PDF, 2 MB)

rotec® sleeves have been in use around the world since 1990. With outstanding innovations and a continuous improvement process of sleeve technology, cost efficiency, service and ecological responsibility, rotec® sleeves became the number one in terms of effectiveness, reliability and convenience in daily practice.

Available models

Technical specifications
Field of application
Mid-web / Wide-web / Pre-Print
Wall thickness
0.9 mm - 125 mm
Length
250 mm - 2600 mm
Outer diameter tolerance
+/- 0.02 mm
Total indicated run-out (TIR) tolerance
+/- 0.02 mm (measured on carrier cylinder at TIR ≤ 0.005 mm)
Length tolerance
DIN ISO 2768 T1c

The benchmark in plate mounting sleeves

Product overview

  • Available with rotec® Ω Technology that provides complete conductivity from the base sleeve through to the surface.

Benefits

  • Superior service life and outstanding durability
  • Consistent and long-lasting mounting and clamping characteristics
  • Easy and reliable handling

Technical specifications
Field of application
Mid-web / Wide-web / Pre-Print
Wall thickness
7.5 mm - 125 mm
Length
250 mm - 2400 mm
Outer diameter tolerance
+/- 0.02 mm
Total indicated run-out (TIR) tolerance
+/- 0.02 mm (measured on carrier cylinder at TIR ≤ 0.005 mm)
Length tolerance
DIN ISO 2768 T1c

Bounce reduction for top printing speeds with superior dimensional stability

Product overview

  • These products provide superior dimensional stability, because the sleeve construction includes an additional glassfibre barrier layer to prevent any growth.
  • These products are an advantage for the press operator by being easier to handle. This comes from reduced weight and easier mounting properties.
  • New easy-mount technology was developed for these products using advanced materials and state-of-the-art sleeve construction to make mounting easier for the press operator
  • These products are ideal for high-speed applications because the construction and materials of these sleeves provide bounce reduction properties.
  • Available with rotec® Ω Technology that provides complete conductivity from the base sleeve through to the surface.

Benefits

  • Weight optimized with up to 25% reduced weight compared to rotec® Blue Light Sleeve
  • Newly developed easy-mount technology
  • Specialized sleeve construction for bounce reduction and faster press speeds
  • Superior dimensional stability for long-lasting, consistent register accuracy

Technical specifications
Field of application
Mid-web / Wide-web / Pre-Print
Wall thickness
30 mm - 125 mm
Length
600 mm - 2400 mm
Outer diameter tolerance
+/- 0.02 mm
Total indicated run-out (TIR) tolerance
+/- 0.02 mm (measured on carrier cylinder at TIR ≤ 0.005 mm)
Length tolerance
DIN ISO 2768 T1c

Easier handling with superior dimensional stability

Product overview

  • These products provide superior dimensional stability, because the sleeve construction includes an additional glassfibre barrier layer to prevent any growth.
  • These products are an advantage for the press operator by being easier to handle. This comes from reduced weight and easier mounting properties.
  • Available with rotec® Ω Technology that provides complete conductivity from the base sleeve through to the surface.

Benefits

  • Weight optimized with up to 50% reduced weight compared to rotec® Blue Light Sleeve
  • New lightweight polyurethane intermediate layer
  • Superior dimensional stability for long-lasting, consistent register accuracy
  • End plate sleeve edge sealing for long lasting protection

Technical specifications
Field of application
Mid-web / Wide-web
Wall thickness
2.9 mm - 125 mm
Length
250 mm - 2500 mm
Outer diameter tolerance
+/- 0.02 mm
Total indicated run-out (TIR) tolerance
+/- 0.02 mm (measured on carrier cylinder at TIR ≤ 0.005 mm)
Length tolerance
DIN ISO 2768 T1c

Unique compressibility

Product overview

  • These products have a compressible outer surface for optimized printability.
  • Available with rotec® Ω Technology that provides complete conductivity from the base sleeve through to the surface.

Benefits

  • Long-lasting compressibility, does not collapse with use
  • Plate and tape savings, print consistency with long print runs
  • Low dot gain, best solid ink density on irregular substrates

Technical specifications
Field of application
Offset
Repeats
92.426 mm cylinder - all repeats from 381 mm - 762 mm / 152.905 mm cylinder - all repeats from 603 mm - 1143 mm / Special sizes upon request
Wall thickness (Offset Plate Sleeve)
14.5 mm - 106 mm
Wall thickness (Offset Blanket Sleeve)
12.4 mm - 106 mm
Length
92.426 mm cylinder - 566 mm / 906 mm
152.905 mm cylinder - 1166 mm / 1306 mm
Further lengths available upon request
Outer diameter tolerance
+/- 0.02 mm
Total indicated run-out (TIR) tolerance
+/- 0.02 mm (measured on carrier cylinder at TIR ≤ 0.005 mm)
Length
DIN ISO 2768 T1c

Unique durable construction

Product overview

  • These products provide superior dimensional stability, because the sleeve construction includes an additional glassfibre barrier layer to prevent any growth.

Benefits

  • Offset plate and blanket sleeve set specifically designed for web offset presses
  • Allows extremely quick format changes for all repeat sizes
  • Highest dimensional stability due to special inner construction
  • Highest durability at high temperatures and torque forces
  • Perfect resistance to UV inks and solvents

Technical specifications
Field of application
Offset
Repeats
92.426 mm cylinder - all repeats from 381 mm - 762 mm / 152.905 mm cylinder - all repeats from 603 mm - 1143 mm / Special sizes upon request
Wall thickness (Offset Plate Sleeve)
14.5 mm - 106 mm
Wall thickness (Offset Blanket Sleeve)
12.4 mm - 106 mm
Length
92.426 mm cylinder - 566 mm / 906 mm
152.905 mm cylinder - 1166 mm / 1306 mm
Further lengths available upon request
Outer diameter tolerance
+/- 0.02 mm
Total indicated run-out (TIR) tolerance
+/- 0.02 mm (measured on carrier cylinder at TIR ≤ 0.005 mm)
Length
DIN ISO 2768 T1c

Extremely durable

Product overview

  • These products are an advantage for the press operator by being easier to handle. This comes from reduced weight and easier mounting properties.
  • Available with rotec® Ω Technology that provides complete conductivity from the base sleeve through to the surface.

Benefits

  • Optimal stability with low weight
  • Robust and durable over long time period
  • Fibreglass for perfect bonding characteristics with different coating materials

Technical specifications
Wall thickness
0.8 mm

Sleeve to protect products with high-end surfaces

Product overview

  • These products are an advantage for the press operator by being easier to handle.

Benefits

  • Protection of anilox and other valuable products during storage and transport
  • Rubber ring on the end to hold the cover sleeve in place
  • Extra long life due to excellent durability
XSYS – rotec

XSYS – rotec is the specialist for the global flexographic printing industry. With plates, sleeves, adapters, know-how and our worldwide service network we support our customers in the printing and the packaging industry. All our commitment and developments have one goal: brilliant results. And that in more than one way. First we stand for brilliant products that provide our customers with high-quality printing results. At the same time, we ensure the efficient use of resources and thus successful business.

Similar products

XSYS - rotec® Adapters

XSYS - rotec® Adapters

[rotec® Sleeves, XSYS]

Select a market