Need support?

Please leave a message

×
Eltra - Carbon/Sulfur Analyzer - ELEMENTRAC CS-i

Product advantges

  • Simultaneous carbon and sulfur determination with minimal sample preparation
  • Wide range of inorganic materials can be analyzed
  • Freely selectable configuration of each IR cell
  • Optional gold IR path for analysis of halogen or acid containing samples
  • Control of induction performance provides more precise analysis of samples with low melting temperature
  • Powerful (2.2 kW) induction furnace for temperatures above 2,000 °C

 

Application Examples

Alloys, carbides, cast iron, cement, ceramics, copper, glass, iron, minerals, ores, refractory metals, sand, steel, titanium

Function Principle

Carbon / Sulfur Analyzer CS-i: Operation

Operating the CS-i is simple and safe. After weighing the sample in a ceramic crucible, the weight is transferred from the interfaced balance to the PC. If required, sample weights can also be entered manually. Then an accelerator (such as iron or tungsten) is added and, after having placed the crucible on the pedestal, the analysis starts. The analysis time is 40 to 50 seconds. The detector signals and instrument parameters are displayed during analysis. Evaluation of the signals and display of the results are done automatically; the data can be transferred to a laboratory information management system (LIMS). The CS-i requires minimum maintenance. The particle filters and chemicals which need to be maintained are easily accessible.

Carbon/Sulfur Analyzer CS-i: Measuring Principle

In the induction furnace the sample is melted in a pure oxygen atmosphere, causing sulfur to react to sulfur dioxide (SO2) and carbon to a mixture of carbon monoxide (CO) and carbon dioxide (CO2). The combustion gases pass through a dust filter and moisture absorber for purification. In the next step the sulfur dioxide is detected in infrared cells. In the CS-i infrared cells with different sensitivities (high/low) can be adapted according to the user’s requirements. Oxidation of both, carbon monoxide to carbon dioxide and sulfur dioxide to sulfur trioxide follow the sulfur measurement. The SO3 gas is removed with cellulose wool; the carbon content is detected by infrared cells which can be individually customized. The ELTRA CS-i analyzer can be equipped with up to 4 independent infrared cells.

 

Technical Specification

Measured elements carbon, sulfur
Samples inorganic
Furnace alignment vertical
Sample carrier ceramic crucibles
Field of application construction materials, engineering / electronics, geology / mining, glass / ceramics, steel / metallurgy
Furnace induction furnace, above 2,000 °C
Detection method solid state infrared absorption
Number of IR cells 1 - 4
Material of IR path aluminum (optional gold)
Typical analysis time 40 seconds (nominal)
Chemicals required magnesium perchlorate, platinum-based catalyst, sodium hydroxide
Gas required compressed air (4 bar/ 60 psi)
oxygen 99.5 % pure (2 - 4 bar / 30 - 60 psi) oxygen 99.5 % pure (2 - 4 bar / 30 - 60 psi)
Power requirements 230 V, 50/60 Hz, max. 15 A, 3450 W
Dimensions (W x H x D) 52 x 84 x 75 cm
Weight ~ 150 kg
Required equipment balance (resolution 0.0001g), monitor, PC
Optional accessories Autoloader (for 36 or 130 crucibles), carrier gas purification, halogen trap, HTF-540 pre-heating furnace, voltage stabilizer 5 KVA

Key Features

  • Simultaneous carbon and sulfur determination with minimal sample preparation
  • Wide range of inorganic materials can be analyzed
  • Freely selectable configuration of each IR cell
  • Optional gold IR path for analysis of halogen or acid containing samples
  • Control of induction performance provides more precise analysis of samples with low melting temperature
  • Powerful (2.2 kW) induction furnace for temperatures above 2,000 °C
  • NEW: automatic vacuum cleaning system ensures higher measurement precision and stability
  • Heated and easily accessible dust trap allows for improved sulfur detection
  • Optimized catalyst reactor permits more accurate carbon detection
  • NEW: ELEMENTS software with comprehensive analysis and diagnosis tools (supporting data and application export, comment fields, and many more)
  • Single and multipoint calibration
  • Low maintenance
  • Robust design allows usage in production control and laboratory
  • การก่อสร้าง
  • การศึกษาและวิชาการ
  • เครื่องจักรและการผลิต
  • เหมืองแร่และแร่ธาตุ
  • การบริการ
Eltra

ELTRA is a specialist for elemental analyzers for the accurate and rapid analysis of solid materials. ELTRA equipment is a standard for elemental analysis in industries such as mining, steel, energy, cement and metal working.

ELTRA analyzers are used to reliably determine elements like carbon, hydrogen, sulfur, oxygen and nitrogen, and cover a wide, dynamic measuring range. The ability to adapt each analyzer to user specifications allows the precise measurement of a great variety of organic and inorganic samples in a multitude of applications.

[]